RE: [iPAQ] trouble using lince/osloader

Hello Jari,

You need to use the boot loader from the v0.13 directory. There was a change
in the flash chips id number, that the pre v0.12 boot loaders do not
recognize.

Best Regards,

--George

George France, france@crl.dec.com
Cambridge Research Laboratory, Compaq Computer Corporation
One Cambridgecenter MS: CRL
Cambridge, MA 02142 USA
Phone: (617) 551-7665
FAX: (617) 551-7650

> -----Original Message-----
> From: Jari Kirma [mailto:jkirma@cc.hut.fi]
> Sent: Wednesday, August 23, 2000 2:50 PM
> To: ipaq@handhelds.org
> Subject: [iPAQ] trouble using lince/osloader
>
>
>
> I have big troubles loading v0.12 to my iPAQ according to the
> instructions.
>
> Both LinCE and osloader in the ftp dir result the following when
> trying Tools > Bootldr > Run after loading from file:
>
> osloader Error
>
> Error opening \bootldr.
> GetLastError = 2
>
> About > LinCE/osloader
> messages report following bootldr versions:
>
> LinCE 1.0.0: bootldr 2.3.0
> osloader 1.2.0: bootldr 2.8.2
>
> bootldr files (on the HOWTO) seem to be 2.8.4.
> Are these files fixed to go along with certain LinCE/osloader version?
>
> if I try just Tools > Bootldr > Run
> following results on serial console:
>
> boot> load bootldr
> loading flash region bootldr
> using xmodem
> ready for xmodem download..
> Download Successful
> 0000DF00 bytes loaded to C0000400
> img_size is too large for region: 00000000
>
> BTW, at least my WinCE or PocketPC, or whatever, refers
> "root" directory
> as "My Device", not "My PocketPC" ...
>
> -kirma
>
> _______________________________________________
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
>
Received on Wed Aug 23 12:31:55 2000