hello,
soory about my poot english !
i have a ipaq 3970 with an damaged bootloader (rev 2.21.12)
the boot> prompt is not work
i can see the bootloader menu, but not more
if i connect the ipaq via serial port via minicom / hyperterminal
and power on in can see this:
enabling mmu
FLASH_BASE=00000000
PXA: Evacuating 1MB of Flash to DRAM at: A3E00000
done
Map Flash virtual section to DRAM at: A3E00000
00000000 A3E00C0A
00000040 04000C02
00000080 08000C02
00000100 10000C02
00000140 14000C02
00000000 A3E00C0A
00000500 00000C02
00000A00 A0000C0A
00000A40 A4000C0A
00000E00 E0000C02
not more !
no boot !
no action if i press "serial bootloader console" (boot> is not to see at terminalprogram)
can you tell me how to fix the bootloader ?
how to upload it without windows ce oder ext. bootloader (boot>)
thanks
bye
dennis
i had opie-0.7.2 on the ipaq, flashed then opie-0.8.0 to my ipaq, the x-server dit not run
so i tryed to flash the opie-0.7.2 on my ipaq, but i used the wrong file (bootopie-v0.7.2-h3900.tar)
________________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt neu bei WEB.DE FreeMail: http://freemail.web.de/?mc=021193
Received on Tue Dec 28 2004 - 06:44:04 EST
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 18:33:26 EDT