[iPAQ] Ipaq 3660 into a Brick

Hello,

After a Brainless manipulation my Ipaq turned into a Brick.

I have found on internet a web site that explain how to fit a jtag
interface to an Ipaq 3660

http://openwince.sourceforge.net/jtag/iPAQ-3600/

I followed the instruction, i isntalled the jtag 0.51,plug the parallel
cable and the detection of the device work fine.

but i got an error when a tried to flash my ipaq.

Here the result of the jtag:

<---------- Begin ------------->
jtag> detect
IR length: 5
Chain length: 1
Device Id: 10001001001001100001000000010011
  Manufacturer: Intel
  Part: SA1110
  Stepping: B4
  Filename: /usr/local/share/jtag/intel/sa1110/sa1110

jtag> detectflash
Query identification string:
        Primary Algorithm Command Set and Control Interface ID Code:
0x0001 (Intel/Sharp Extended Command Set)
        Alternate Algorithm Command Set and Control Interface ID Code:
0x0000 (null)
Query system interface information:
        Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV
        Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV
        Vpp [Programming] Supply Minimum Write/Erase voltage: 0 mV
        Vpp [Programming] Supply Maximum Write/Erase voltage: 0 mV
        Typical timeout per single byte/word program: 128 us
        Typical timeout for maximum-size multi-byte program: 128 us
        Typical timeout per individual block erase: 1024 ms
        Typical timeout for full chip erase: 0 ms
        Maximum timeout for byte/word program: 2048 us
        Maximum timeout for multi-byte program: 2048 us
        Maximum timeout per individual block erase: 16384 ms
        Maximum timeout for chip erase: 0 ms
Device geometry definition:
        Device Size: 8388608 B (8192 KiB, 8 MiB)
        Flash Device Interface Code description: 0x0002 (x8/x16)
        Maximum number of bytes in multi-byte program: 32
        Number of Erase Block Regions within device: 1
        Erase Block Region Information:
                Region 0:
                        Erase Block Size: 131072 B (128 KiB)
                        Number of Erase Blocks: 64

jtag> print
 No. Manufacturer Part Stepping
Instruction Register
---------------------------------------------------------------------------------------------
   0 Intel SA1110 B4
EXTEST BSR
 
Active bus:
*0: Intel SA-1110 compatible bus driver via BSR (JTAG part No. 0)
        start: 0x00000000, length: 0x100000000, data width: 32 bit

jtag> flashmem 0 /home/abornand/temp/bootldr-2.18.01.bin
Note: Supported configuration is 2 x 16 bit or 1 x 16 bit only
Manufacturer: Intel
Chip: 28F640J3A
program:
 
sr = 0x00AA00AA
 
block 0 unlocked
 
sr = 0x00A800A8
erasing block 0: 99
addr: 0x00000000
sr = 0x00980098
 
flash error

<--------- END ------------->

Any idea ? how i can fix them ?

Thanx for yours answers.

Alexandre Bornand
Student IL2005a
University of applied science
Received on Thu Nov 4 05:06:03 2004