Thanks! Will try it now!
>>>>> "Norm" == Norm Dressler <ndressler@dinmar.com> writes:
Norm> Well a few asked about this patch so I'll post it. I did not
Norm> write it -- read the README for help.
Norm> This driver fixes the problem with the 2.6 ipaq module failing
Norm> to properly connect your ipaq.
Norm> Norm
Norm> On October 22, 2004 01:56 am, A. P. Kennedy wrote:
>> >>>>> "Norm" == Norm Dressler <ndressler@dinmar.com> writes:
>>
Norm> I used Debian and don't have any problems. When I plug in the
Norm> USB cable, it loads the ipaq driver and away I go. I've also
Norm> install RAKI -- which will help in the GUI.
>>
Norm> Which kernel are you using? If it's 2.6.x, then you may need to
Norm> use a patched ipaq kernel which is what I needed to do. I
Norm> couldn't get it to connect until I did so. But if you can't get
Norm> USB working at all, then maybe check you are starting hotplug
Norm> (try /etc/init.d/hotplug start).
>> Where is this patch. I can't get nothing going with usb and
>> 2.6.x.
>>
>> Thanks
>>
>> _______________________________________________ Open Source
>> Software for Compaq iPAQ Handhelds. iPAQ mailing list
>> iPAQ.a.t.handhelds.org https://handhelds.org/mailman/listinfo/ipaq
>> irc://irc.openprojects.net #ipaq
Received on Sat Oct 23 00:13:23 2004
This archive was generated by hypermail 2.1.8 : Sat Oct 23 2004 - 00:15:50 EDT