Well a few asked about this patch so I'll post it. I did not write it -- read
the README for help.
This driver fixes the problem with the 2.6 ipaq module failing to properly
connect your ipaq.
Norm
On October 22, 2004 01:56 am, A. P. Kennedy wrote:
> >>>>> "Norm" == Norm Dressler <ndressler@dinmar.com> writes:
>
> Norm> I used Debian and don't have any problems. When I plug in the
> Norm> USB cable, it loads the ipaq driver and away I go. I've also
> Norm> install RAKI -- which will help in the GUI.
>
> Norm> Which kernel are you using? If it's 2.6.x, then you may need to
> Norm> use a patched ipaq kernel which is what I needed to do. I
> Norm> couldn't get it to connect until I did so. But if you can't get
> Norm> USB working at all, then maybe check you are starting hotplug
> Norm> (try /etc/init.d/hotplug start).
>
> Where is this patch. I can't get nothing going with usb and 2.6.x.
>
> Thanks
>
> _______________________________________________
> Open Source Software for Compaq iPAQ Handhelds.
> iPAQ mailing list
> iPAQ@handhelds.org
> https://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
Received on Fri Oct 22 07:43:05 2004
This archive was generated by hypermail 2.1.8 : Fri Oct 22 2004 - 07:45:01 EDT