[iPAQ] The problem about iPaq 5550 with familiar 2.4.19-rmk6-pxa1-hh36 #490 installed

I installed familiar 2.4.19-rmk6-pxa1-hh36 #490 on my iPaq 5550 with a CF ethernet card.
 The wlan0 works very well and it can associate itself with my AP.when I tried to use the
 wlan0 to download a file from my web server ,the transmition speed more than 150K/s and
 no any errors occured during the tranmision.But the eth0 works not well.I use wget download
 a file from a web server through eth0 .The speed is obvious slower than normal and after
 download over,I use ifconfig and I found some error occured during the transmition.The
 information is below:
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:C0:1B:00:9D:44
          inet addr:192.168.0.211 Bcast:192.168.0.255 Mask:255.255.255.0
          inet6 addr: fe80::2c0:1bff:fe00:9d44/64 Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:484 errors:0 dropped:0 overruns:0 frame:0
          TX packets:141 errors:27 dropped:0 overruns:0 carrier:0
          collisions:48 txqueuelen:100
          RX bytes:311356 (304.0 KiB) TX bytes:16720 (16.3 KiB)
          Interrupt:145 Base address:0x300
and I found some information below in the syslog:
Jan 1 06:19:51 familiar syslog.info klogd: NETDEV WATCHDOG: eth0: transmit timed out
Jan 1 06:19:51 familiar syslog.debug klogd: eth0: Tx timed out, lost interrupt?
 TSR=0x43, ISR=0x2, t=32.
Jan 1 06:19:52 familiar syslog.info klogd: NETDEV WATCHDOG: eth0: transmit timed out
Jan 1 06:19:52 familiar syslog.debug klogd: eth0: Tx timed out, lost interrupt?
 TSR=0x43, ISR=0x3, t=39.
Jan 1 06:19:53 familiar syslog.info klogd: NETDEV WATCHDOG: eth0: transmit timed out
Jan 1 06:19:53 familiar syslog.debug klogd: eth0: Tx timed out, lost interrupt?
 TSR=0x43, ISR=0x3, t=28.
Jan 1 06:19:56 familiar syslog.info klogd: NETDEV WATCHDOG: eth0: transmit timed out
Jan 1 06:19:56 familiar syslog.debug klogd: eth0: Tx timed out, lost interrupt?
 TSR=0x43, ISR=0x3, t=28.
Jan 1 06:19:58 familiar syslog.info klogd: NETDEV WATCHDOG: eth0: transmit timed out
Jan 1 06:19:58 familiar syslog.debug klogd: eth0: Tx timed out, lost interrupt?
 TSR=0x43, ISR=0x3, t=23.
This problem has puzzled me for a long time,I don't know why.So if anyone know this,please tell me! Thanks a lot in advance!!
 
By the way,I need to tell a strange phenomenon .when I installed a apm on my iPaq 5550 with the familiar 2.4.19-rmk6-pxa1-hh30 installed,I use apm -s to make the 5550 sleep and it does well.But When I push the sleep button to resume 5550, the touchscreen is full of the colorful square and dead.The system is not dead. On the moment I used eth0 download a file from my webserver.ANYTHING IS OK!!the speed is more than 150K/S and no any error occured during the transmition.
                                    God save me!!:(
                                                               
                                                                       Petee

---------------------------------
Do You Yahoo!?
完全免费的雅虎电邮，马上注册获赠额外60兆网络存储空间
Received on Sat Mar 27 07:46:53 2004