RE: [iPAQ] HP3900 problems with v0.7 rc1

Actually, since I've been having this problem, I decided to see if it
had anything to do with it going into suspend mode. I took the iPaq off
the cradle completely, and I stopped having the problems. Then I decided
to see if it was related to being under power, so I plugged the iPaq
into power via the little adapter, and still couldn't reproduce the
problem. So the only common point for the problem now was that is was
under power in the cradle, and I was connected to it serially.

As for having the problem with the slots empty, I will try that over the
next couple of days and email the list with results.

Thanks for getting back to me.

Andy

-----Original Message-----
From: ipaq-bounces@handhelds.org [mailto:ipaq-bounces@handhelds.org] On
Behalf Of Russell Nelson
Sent: Saturday, April 26, 2003 11:12 PM
To: ipaq@handhelds.org
Subject: Re: [iPAQ] HP3900 problems with v0.7 rc1

Andrew Thiessen writes:
> I have a 3975 with a nexian dual CF sleeve. In that sleeve, in port
1,
> there is a Memorex 512MB CF card, and in port 0, a Netgear MA701
802.11b
> CF card.

Do you also have problems if you leave the slots empty? (Trying to
figure out if it's the sleeve driver or an interaction between the
sleeve and the -cs driver.) I've got a Memplug dual CF with MA701 and
64MB CF card and am not having these problems.

-- 
--My blog is at angry-economist.russnelson.com  | If war is the answer,
then
Crynwr sells support for free software  | PGPok | the question must be
truly
521 Pleasant Valley Rd. | +1 315 268 1925 voice | horrific.
Potsdam, NY 13676-3213  | +1 315 268 9201 FAX   | 
_______________________________________________
Open Source Software for Compaq iPAQ Handhelds.
iPAQ mailing list
iPAQ@handhelds.org
https://handhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq