Re: [iPAQ] Bluetooth from CSR -> BCSP

Hay, I sent you a message back for your previous post, but here it is again...

>Hmm.. this can be bad..
>
>Looking at what you tried, I only see two other option combos that you havn't
>tried. Give these a try...
>
>pskey -d /dev/ttySB0 -b -s 115200
>
>pskey -d /dev/ttySB0 -b -s 230400
>
>If none of these work at all, then you probably accidently messed up one of
>the pskey settings when you where following the directions. If this is the
>case, then unfortunatly only hp/Compaq can fix it, as far as I know.
>
>Good luck, man.

On Wednesday 19 March 2003 15:03, Abhishek Patil wrote:
> Hi All,
>
> I am having a similar problem. I had mailed the list earlier, but didnt get
> any response.
>
> I am having problems running Bluetooth on my iPAQ (with linux installed). I
> am running familiar 0.6 with Bootopie.
>
> To install Bluez, I followed the instructions on:
> http://www.cs.umd.edu/~gvijay/bluez.html
> and the whole thing got screwed up. After that point, Bluetooth has never
> worked on my iPAQ again. Even reflashing hasnt helped. The author of the
> website has updated his page and the instructions on the new page:
> http://www.handhelds.org/z/wiki/BluetoothHowto
> also didnt help much.
>
> Here are some of the errors that I get:
> > ---
> > / # hciattach /dev/ttySB0 bcsp 230400
> > BCSP initialization timed out
> >
> > # pskey -d /dev/ttySB0 -s 230400
> > Physical device :/dev/ttySB0
> > Speed :230400
> > Use BCSP :NO
> > Initiating read thread
> > Now trying to read firmware info
> > BT SYS: ERROR: hci_receive_data: discarding 9 bytes
> > Timeout!!!
> > Error in reading firmware info
> >
> > # pskey -d /dev/ttySB0 -s 115200
> > Physical device :/dev/ttySB0
> > Speed :115200
> > Use BCSP :NO
> > Initiating read thread
> > Now trying to read firmware info
> > BT SYS: ERROR: hci_receive_data: discarding 8 bytes
> > Timeout!!!
> > Error in reading firmware info
> >
> > #
> > ---
>
> If anyone has any suggestions, Please let me know.
>
> Thanks & Regards,
> Abhishek
>
> --- creator <creator@inreach.com> wrote:
> > It's in the oldbluetoothdoc on the wiki.
> >
> > http://www.handhelds.org/z/wiki/OldBluetoothDoc
> >
> > a little over half the way down. Here's the text...
> >
> > Thanks to Andrew, here are the original pskey-settings for the 3870, if
> > you
> > ever go back to windows:
> > 0191 03b0 0006 00fa 0014 0004 0000 0004 001e 0064 000a
> > 01f9 0001
> >
> > -Robert
> >
> > On Tuesday 18 March 2003 22:52, Cameron McCormack wrote:
> > > Since updating opie a while ago, I notice that the Bluetooth applet
> > > wants to hciattach my bluetooth chip using BCSP mode and not CSR.
> > >
> > > What's the way with pskey to change it back to BCSP 230400 mode?
> > >
> > > Thanks,
> > >
> > > Cameron
> >
> > _______________________________________________
> > Open Source Software for Compaq iPAQ Handhelds.
> > iPAQ mailing list
> > iPAQ@handhelds.org
> > https://handhelds.org/mailman/listinfo/ipaq
> > irc://irc.openprojects.net #ipaq
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> http://platinum.yahoo.com
> _______________________________________________
> Open Source Software for Compaq iPAQ Handhelds.
> iPAQ mailing list
> iPAQ@handhelds.org
> https://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
Received on Thu Mar 20 01:03:04 2003