hi Jamey
I completed the kernel installation with 802.1d ethernet bridging enabled tested & works fine. Would you like to create a brctl package or bridge module package. Latter is defiantely more useful
Somil
-- On Thu, 27 Feb 2003 13:58:50 Hicks, Jamey wrote: > > >> -----Original Message----- >> From: Somil Asthana [mailto:somilasthana@lycos.com] >> Sent: Thursday, February 27, 2003 9:43 AM >> To: ipaq@handhelds.org >> Cc: somilasthana@mailcity.com >> Subject: [iPAQ] Compiling linux-2.4.18-rmk3-hh12 kernel for iPAQ >> >> >> Hi All >> I am trying to compile linux-2.4.18-rmk3-hh12 kernel >> downloaded from cvs repository. I need to recompile the >> kernel because I need 802.1d ethernet bridging. Instead of >> using cross-compiler for compiling I downloaded all my src >> code on intimate and followed following steps: > >This looks basically correct. I suggest you start with: > > make h3600_config > >and then use make menuconfig to turn on bridging. If bridging can be built as a module I will add it to the standard config and packages. > >> make menuconfig >> make depend >> make zImage >> make modules >> make install modules >> >> then tar -cf modules.tar /lib/modules/2.4.18-rmk3 >> >> Once this all is successful . I do following on my iPAQ which >> is running familiar 0.5.2 >> >> ipaq #ln -s /boot/newzImage /boot/zImage >> ipaq # tar ...modules.tar >> >> I copy my newzImage from >> /usr/src/linux-2.4.18-rmk3-hh12/arch/arm/boot/ >> as it gets built there. >> > >Check depmod -ae to look for bad module ownership (must be root), missing symbols, etc. > >What errors are you getting? dmesg or logread can be helpful. > >-Jamey > > _____________________________________________________________ Get 25MB, POP3, Spam Filtering with LYCOS MAIL PLUS for $19.95/year. http://login.mail.lycos.com/brandPage.shtml?pageId=plus&ref=lmtplusReceived on Fri Mar 14 22:23:15 2003
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:45:01 EDT