[iPAQ] i don´t see my whole memory

hello handhelds-team,

first off all- you did a great job and i´m glad to kick windows out of my
ipaq!!!

i run bootloader 2.18.54 and OPIE 0.9.1 with
Kernel 2.4.18-rmk3 on a Compaq H3600 with 64MB flash.

now...i have some questions:

look at df -h: i have 64 MB internal-flash installed.
how can i use my whole memory of 64 MB and where is the rest?

how can i changed the tmpfs into a fixed memory (this huge memory has no
data after a reset ;-( .
under wince i was able to use the whole memory.

/ # free
              total used free shared buffers
  Mem: 63004 21788 41216 0 16
 Swap: 0 0 0
Total: 63004 21788 41216

------------------------------------------------------------------------

/ # df -h
Filesystem Size Used Available Use% Mounted on
/dev/mtdblock/1 15.8M 11.6M 4.2M 74% /
tmpfs 30.8M 64.0k 30.7M 0% /mnt/ramfs

------------------------------------------------------------------------

/etc # cat mtab
/dev/mtdblock/1 / jffs2 rw 0 0
none /dev devfs rw 0 0
tmpfs /mnt/ramfs tmpfs rw 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw 0 0

-------------------------------------------------------------------------

/etc # cat fstab
# <device> <mountpoint> <filesystemtype> <options> <dump>
<fsckorder>
/dev/mtdblock/1 / jffs2 defaults 0 0
tmpfs /mnt/ramfs tmpfs noauto 0 0
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0622 0 0

-------------------------------------------------------------------------

greetings and thanks in advance

michael meyer

#windows is not the answer
#windows is the question
#and the answer is: no
Received on Tue Feb 18 2003 - 20:09:25 EST