Re: [iPAQ] cardmgr not work correctly

Hi Phil,
I have already add the entries in this file.
The problem is another.
Thanks a lot
Fabio

Philip Blundell <pb@nexus.co.uk> ha scritto:

> You probably have to add an entry to /etc/pcmcia/config. Check logread
> for clues as to what's going on.
>
> p.
>
> On Mon, 2003-02-17 at 16:33, Fabio Cibin wrote:
> > Hi all,
> > I have an iPAQ H3970, I have installed on it familiar version 0.6.1 and the
> > kernel version is 2.4.19-rmk4-pxa2-hh8.
> > The pcmcia work correctly but for one Card don't work.
> > This Card is NI DAQ-6024E , a data acquisition board. The driver for this card
> > is built by comedi and if I launch "modprobe <driver>" load correctly.
> > But obviously I want that when I inserted the pcmcia card the driver load
> > automatically, but this don't happen!!!!!
> > In my opinion the cardmgr process recognize the card (cardctl ident is ok) but
> > don't load the module and don't turn on the Card.
> > What do you think about it ?
> > Thanks for every help in advanced.
> > Fabio
> >
> > _______________________________________________
> > Open Source Software for Compaq iPAQ Handhelds.
> > iPAQ mailing list
> > iPAQ@handhelds.org
> > https://handhelds.org/mailman/listinfo/ipaq
> > irc://irc.openprojects.net #ipaq
> >
>
>

--