Re: [iPAQ] cardmgr not work correctly

You probably have to add an entry to /etc/pcmcia/config. Check logread
for clues as to what's going on.

p.

On Mon, 2003-02-17 at 16:33, Fabio Cibin wrote:
> Hi all,
> I have an iPAQ H3970, I have installed on it familiar version 0.6.1 and the
> kernel version is 2.4.19-rmk4-pxa2-hh8.
> The pcmcia work correctly but for one Card don't work.
> This Card is NI DAQ-6024E , a data acquisition board. The driver for this card
> is built by comedi and if I launch "modprobe <driver>" load correctly.
> But obviously I want that when I inserted the pcmcia card the driver load
> automatically, but this don't happen!!!!!
> In my opinion the cardmgr process recognize the card (cardctl ident is ok) but
> don't load the module and don't turn on the Card.
> What do you think about it ?
> Thanks for every help in advanced.
> Fabio
>
> _______________________________________________
> Open Source Software for Compaq iPAQ Handhelds.
> iPAQ mailing list
> iPAQ_at_handhelds.org
> https://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
>
Received on Mon Feb 17 2003 - 16:39:28 EST