Date: Wed Jul 17 2002 - 10:54:52 EDT
Using Compaq OHH BootLoader, Rev 2-18-1 I last loaded Familiar v0.5.3
task-bootserial.jffs2. as instructed in
http://familiar.handhelds.org/familiar/releases/v0.5.3/install/H3600/ins
tall.html#components
I loaded the latest Bahia_Network_Driver, the new BND release 0.9.2,
dated 6/1/2002
on to two separate PCs, it "seems" to be working, see attached
"devices.jpg"
I execute the following script: (also tried 192.168.0.2, and others).
modprobe usb-eth
ifconfig usbf 192.168.000.007 netmask 255.255.255.0
route add default gw 192.168.0.1
echo "nameserver 207.217.077.082" > /etc/resolv.conf
I still have not been able to ping from the PC to the iPAQ
$ping 192.168.0.7
Pinging 192.168.0.7 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 192.168.0.7:
Packets: Sent = 4, Received = 0, Lost = 4
(100% loss
Approximate round trip times in milli-seconds
Minimum = 0ms, Maximum = 0ms, Average = 0ms
or from the iPAQ 3835 to the PC
# ping 192.168.0.1
PING 192.168.0.1 (192.168.0.1): 56 data bytes
--- 192.168.0.1 ping statistics ---
4 packets transmitted, 0 packets received, 100%
packet loss
or net.
# ping 207.217.077.082
ping: unknown host 207.217.077.082
I loaded the modules dependent on and including task-x_0.3_arm.ipk by
hand
since I can't ping. I get a blank screen and a touch sensitive, movable
cursor.
My backups of the wince_image.gz that are on my PC unzip and gunzip (on
the iPAQ)
with "Error: unexpected end of file encountered."
Although I backed up the wince image to an SD card I haven't a clue as
to how to get it
and reboot with it.
Please help. Below are the reboot messages.
Regards,
Paul
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
# shutdown -r now
INIT: Switching to runlevel: 6
Broadcast message from root (ttySA0) Mon Jun 18 11:42:50 1990...
The system is going down for reboot NOW !!
INIT: Sending processes the TERM signal
INIT: Sending processes thSaving the System Clock time to the Hardware
Clock...
Can't deallocate console 2 errno 16
Deactivating swap... done.
Unmounting local filesystems... umount2: Device or resource busy
umount: none busy - remounted read-only
done.
Rebooting... Restarting system.
Uncompressing Linux............................................. done,
booting t
he kernel.
Linux version 2.4.18-rmk3 (andyc@rockhopper.crl.dec.com) (gcc version
2.95.2 199
91024 (release)) #1 Fri Jun 21 11:02:48 EDT 2002
Processor: Intel StrongARM-1110 revision 9
Machine: Compaq iPAQ H3800
Ignoring unrecognised tag 0x5441000a
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x01F
80000,asset@0x01FC0000:0x00040000 noinitrd root=/dev/mtdblock1
init=/linuxrc co
nsole=ttySA0
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62944KB available (1157K code, 292K data, 68K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (0.000-206.400 MHz)
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis
Communications AB.
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
Console: switching to colour frame buffer device 40x30
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
SA1100 flash: probing 32-bit flash bus
parse_mtdpart{bootldr@0x00000000:0x00040000,root@0x00040000:0x01F80000,a
sset@0x0
1FC0000:0x00040000}
name=bootldr
at_pos=0x00000000
colon_pos=0x00040000,root@0x00040000:0x01F80000,asset@0x01FC0000:0x0004
0000
comma_pos=,root@0x00040000:0x01F80000,asset@0x01FC0000:0x00040000
name=root
at_pos=0x00040000
colon_pos=0x01F80000,asset@0x01FC0000:0x00040000
comma_pos=,asset@0x01FC0000:0x00040000
name=asset
at_pos=0x01FC0000
colon_pos=0x00040000
comma_pos=<NULL>
npartitions=3
partition bootldr o=0 s=40000
partition root o=40000 s=1f80000
partition asset o=1fc0000 s=40000
parse_mtdpart: ret=3
Using Compaq bootldr partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x01fc0000 : "root"
mtd: Giving out device 1 to root
0x01fc0000-0x02000000 : "asset"
mtd: Giving out device 2 to asset
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
IPv4 over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
mtdblock_open
ok
mtdblock_open
mtdblock_release
ok
mtdblock_open
mtdblock_release
ok
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 68K
Setting up RAMFS, please wait...
Setting up some devices
Executing /sbin/init...
INIT: version 2.78 booting
Mounting local filesystems...
mount: tmpfs already mounted on /mnt/ramfs
devpts on /dev/pts type devpts (rw,mode=0622)
mount: proc already mounted
Calculating module dependencies... depmod: *** Unresolved symbols in
/lib/module
s/2.4.18-rmk3/kernel/fs/msdos/msdos.o
depmod: *** Unresolved symbols in
/lib/modules/2.4.18-rmk3/kernel/fs/umsdos/umsd
os.o
done.
Loading modules: apm H3600 Registering HAL abstraction layer
mmc_media_init
register_serial_h3800 0
membase=f0000a00 irq=53
serial_h3800_config_port c0165db4 flags=1
serial_h3800_request_port c0165db4 mapbase=49000a00
ttySB%d0 at MEM 0x49000a00serial_h3800_type c0165db4
(irq = 53) is a H3800_ASIC
h3600_asic_mmc_init
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
h3600_ts h3600_ts_init_module: registering char device
sa1100-rtc SA1100 Real Time Clock driver v1.00
h3600-sleeve init_module successful init major= 0
h3600_generic_sleeve modprobe: Can't locate module h3600_generic_sleeve
h3600-uda1341 run_sbin_hotplug:78 * hotplug_path=/sbin/hotplug
h3600_sleeve_eject-9- sleeve_dev->driver=00000000 sleeve removed
iPAQ audio support initialized
ppp_async CSLIP: code copyright 1989 Regents of the University of
California
PPP generic driver version 2.4.1
Setting the System Clock using the Hardware Clock as reference...
INIT: Entering runlevel: 2
Configuring network interfaces: done.
Starting OpenBSD Secure Shell server: sshd.
Starting X...
iPAQ 3800
Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/,
removing from
list!
familiar login:
