RE: [iPAQ] help - Vic, PCMCIA Videum and V4L2 on IPAQ config problem

Got v4l2 and Winnov drivers installed along with
vic_2.8ucl-1.1.3-ipv6-3_arm.ipk (and required packages) from
http://ipkgfind.handhelds.org/

Now I get the following...
-----------------------------------
sh-2.03# vic 127.0.0.1/8090
V4l: trying /dev/video0... ok, Videum
V4l: color; size: 32x24 => 640x240 (scales)
V4l: ports: MXC
V4l: depth=16, palette=rgb16
V4l: ==> format { 411 422 cif } size { small cif } port { MXC } type {auto
pal
ntsc secam}
V4l: trying /dev/video1... open: No such device
V4l: trying /dev/video2... open: No such device
V4l: trying /dev/video3... open: No such device
setsockopt IP_ADD_MEMBERSHIP: No such device
Aborted
----------------------------------

Can someone explain the "setsockopt IP_ADD_MEMBERSHIP: No such device"
error?

I'm still running on Familiar v0.51 as we have some other apps installed and
would prefer to avoid the upgrade as the other apps are stable.

Thanks.

Mark Kilby
Sr. Software Engineer
SAIC http://www.asset.com
407-243-3512, kilbym@saic.com

-----Original Message-----
From: Hicks, Jamey [mailto:Jamey.Hicks@hp.com]
Sent: Thursday, May 16, 2002 6:12 PM
To: Kilby, Mark
Cc: ipaq@handhelds.org; Terrance Sullivan
Subject: RE: [iPAQ] help - Vic, PCMCIA Videum and V4L2 on IPAQ config
problem

Mark,

I also want to add that the drivers are available but not installed by
default.

ipkg install winnov-modules-2.4.18-rmk3

when you insert the card it should load wnv_cs

Jamey

> -----Original Message-----
> From: Terrance Sullivan [mailto:terdsl@mail.magma.ca]
> Sent: Thursday, May 16, 2002 6:08 PM
> To: Kilby, Mark
> Cc: 'ipaq@handhelds.org'
> Subject: Re: [iPAQ] help - Vic, PCMCIA Videum and V4L2 on IPAQ config
> problem
>
>
> Mark try switching to the FAM v0.5.2 release I believe you'll
> find what
> you're looking for in http://handhelds.org/feeds/2.4.18
>
> \Terry
>
> On Thu, 2002-05-16 at 16:55, Kilby, Mark wrote:
> >
> > (Please be patient with this request. It's my first foray
> into Linux device
> > drivers.)
> >
> > I'm trying to get vic running with a Winnov Videum Traveler
> PCMCIA camera on
> > an iPAQ 3765 running Familiar v0.5.1. When reviewing the
> following pages on
> > the website...
> >
> > http://handhelds.org/feeds/2.4.16/CHANGELOG
> >
> > I see a note that states the required v4l2 api and winnov
> drivers were
> > installed, but I cannot see where they are installed. Vic
> can't find the
> > camera. I assumed that if v4l2 is installed, I would see
> videodevX.o
> > somewhere under /lib/modules ... or am I mistaken?
>
> _______________________________________________
> Open Source Software for Compaq iPAQ Handhelds.
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
>
Received on Wed May 29 14:25:41 2002