RE: [iPAQ] RE: 10 seconds freeze at startup: a bit more info

Sure ! I've never had any sleeve. So why is it waiting for a battery on
it ?

        Xav

Le mer 29/05/2002 à 18:40, Christian, Andrew a écrit :
> Sorry, that should have been /proc/sys/asic
>
> The OWM timeout is the wait time before the OWM interface gives up and decides that nothing is going to respond. In your case, it looks like the battery on the sleeve isn't responding.
>
> - Andrew
>
> > -----Original Message-----
> > From: Xavier Bestel [mailto:xavier.bestel@free.fr]
> > Sent: Wednesday, May 29, 2002 12:23 PM
> > To: Christian, Andrew
> > Cc: iPAQ@handhelds.org
> > Subject: [iPAQ] RE: 10 seconds freeze at startup: a bit more info
> >
> >
> > What's OWM ? And OWM timeout ? What would be a good timeout ?
> > The only (seemingly related) thing I see in /proc/asic/stats
> > is "OWM timeouts 4" but I doubt it's that.
> >
> > Xav
> >
> > Le mar 28/05/2002 à 14:11, Christian, Andrew a écrit :
> > > There is a module parameter "owm_sample_delay" which
> > controls how long
> > > the OWM timeout is. You can check it in /proc/asic/. It should be
> > > measured in milliseconds.
> > >
> > > - Andrew
> > >
> > > > -----Original Message-----
> > > > From: Xavier Bestel [mailto:xavier.bestel@free.fr]
> > > > Sent: Friday, May 24, 2002 7:09 PM
> > > > To: iPAQ
> > > > Cc: Christian, Andrew
> > > > Subject: 10 seconds freeze at startup: a bit more info
> > > >
> > > >
> > > > My 3800 is suspended on AC power, the LED is ON. I press the
> > > > power button to resume it, the LED starts blinking, LCD is
> > > > still OFF, nothing happens except LED blinking for at least
> > > > 10 senconds, then ipaq effectively resumes and here is what I
> > > > got on the serial port:
> > > >
> > > > usbctl: Stopped
> > > > usbctl: Closed
> > > > Unloading SA1100 USB Controller
> > > > OWM read failed -110 (0x000c)
> > > > h3600_apm_get_power_status: unable to access battery
> > > > information iPAQ audio support initialized SA1100 USB
> > > > Controller Core Initialized
> > > > usbctl: Opened for usb-eth
> > > > usbctl: Started for usb-eth
> > > >
> > > >
> > > > note the line "OWM read failed -110 (0x000c)" - is it the
> > > > cause of the long wait ?
> > > >
> > > > Xav
> > > >
> > > >
> > >
> >
> >
> > _______________________________________________
> > Open Source Software for Compaq iPAQ Handhelds.
> > iPAQ mailing list
> > iPAQ@handhelds.org
> > http://handhelds.org/mailman/listinfo/ipaq
> > irc://irc.openprojects.net #ipaq
> >
>
Received on Wed May 29 18:58:54 2002