There is a module parameter "owm_sample_delay" which controls how long the OWM timeout is. You can check it in /proc/asic/. It should be measured in milliseconds.
- Andrew
> -----Original Message-----
> From: Xavier Bestel [mailto:xavier.bestel@free.fr]
> Sent: Friday, May 24, 2002 7:09 PM
> To: iPAQ
> Cc: Christian, Andrew
> Subject: 10 seconds freeze at startup: a bit more info
>
>
> My 3800 is suspended on AC power, the LED is ON. I press the
> power button to resume it, the LED starts blinking, LCD is
> still OFF, nothing happens except LED blinking for at least
> 10 senconds, then ipaq effectively resumes and here is what I
> got on the serial port:
>
> usbctl: Stopped
> usbctl: Closed
> Unloading SA1100 USB Controller
> OWM read failed -110 (0x000c)
> h3600_apm_get_power_status: unable to access battery
> information iPAQ audio support initialized SA1100 USB
> Controller Core Initialized
> usbctl: Opened for usb-eth
> usbctl: Started for usb-eth
>
>
> note the line "OWM read failed -110 (0x000c)" - is it the
> cause of the long wait ?
>
> Xav
>
>
Received on Tue May 28 12:11:11 2002
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:44:48 EDT