[iPAQ] locate crashing...

so with 2.4.17, this completely hung the machine.
now that I've installed 2.4.18, it no longer causes a kernel oops, but
here's the output from boot...

currently running current familiar 0.5.1

Booting Linux image
Uncompressing
Linux......................................................... don
e, booting the kernel.
Linux version 2.4.18-rmk3 (root@tornado) (gcc version 2.95.3 20010315
(release))
 #1 Sat Apr 13 20:48:23 PDT 2002
Processor: Intel StrongARM-1110 revision 8
Architecture: Compaq iPAQ H3600
Ignoring unrecognised tag 0x5441000a
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x01F
C0000 initrd root=/dev/ram0 init=/linuxrc console=ttySA0 ‹3‹4‹5‹6‹7‹8‹9‹:‹
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 64MB = 64MB total
Memory: 60952KB available (1519K code, 326K data, 76K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (0.000-206.400 MHz)
SA1100 USB Controller Core Initialized
get_random_bytes called before random driver initialization
usbctl: Opened for usb-eth
usbctl: Started for usb-eth
USB Function Character Driver Interface - 0.4, (C) 2001, Extenex Corp.
H3600 Registering HAL abstraction layer
request_module[h3600_micro]: Root fs not mounted
h3600_micro_setup: setting up microcontroller interface
SPI: adding adapter h3xxx-spi
SPI: adding driver h3xxx-sleeve
SPI: attaching client c01b6888
init_module successful init major= 0
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
Console: switching to colour frame buffer device 40x30
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SA1100 Real Time Clock driver v1.00
h3600_ts_init_module: registering char device
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
h3600_sleeve_insert: vendorid=0x1125 devid=0x1
h3600_sleeve_insert: unrecognized sleeve
iPAQ audio support initialized
Linux Kernel Card Services 3.1.22
  options: [pm]
SA-1100 PCMCIA (CS release 3.1.22)
installing h3600_pcmcia_ops
sa1100_pcmcia_driver_init: pcmcia_low_level=c01afd70
h3600_pcmcia_init: init=c09adf74 ops=00000000
sa1100_pcmcia_driver_init: skt=0 skt->virt_io=c4835000
sa1100_pcmcia_driver_init: skt=1 skt->virt_io=c4846000
sa1100_pcmcia_driver_init: done
h3600_pcmcia_shutdown: ops=00000000
h3600_pcmcia_init: init=c01e1cfc ops=c01aff24
run_sbin_hotplug:79 * hotplug_path=/sbin/hotplug
h3600_sleeve_register_driver: registered a driver that matches the current
sleev
e Compaq Dual PC Card Sleeve
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 1585K
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 76K
Mounting /proc
Starting cardmgr -o -v
cardmgr[12]: starting, version is 3.1.22
cardmgr[12]: cannot access /lib/modules/2.4.18-rmk3: No such file or
directory
cardmgr[12]: watching 2 sockets
cardmgr[12]: initializing socket 0
cardmgr[12]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter
cardmgr[12]:product info: "Lucent Technologies", "WaveLAN/IEEE", "Version
01.
01", ""
cardmgr[12]:manfid: 0x0156, 0x0002 function: 6 (network)
cardmgr[12]: executing: 'modprobe orinoco_cs'
cardmgr[12]: + modprobe: Can't open dependencies file
/lib/modules/2.4.18-rmk3/m
odules.dep (No such file or directory)
cardmgr[12]: modprobe exited with status 255
cardmgr[12]: module /lib/modules/2.4.18-rmk3/pcmcia/orinoco_cs.o not
available
cardmgr[12]: get dev info on socket 0 failed: Resource temporarily
unavailable
cardmgr[12]: initializing socket 1
cardmgr[12]: socket 1: ATA/IDE Fixed Disk
cardmgr[12]:product info: "IBM", "microdrive"
cardmgr[12]:manfid: 0x00a4, 0x0000 function: 4 (fixed disk)
Trying to free nonexistent resource <c4846000-c484600f>
hda: IBM-DSCM-11000, ATA DISK drive
ide0 at 0xc4846000-0xc4846007,0xc484600e on irq 32
hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [522/64/63] p1 p2
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
cardmgr[12]: executing: './ide start hda'
cardmgr[12]: exiting
Umounting /proc
Changing root
Mounting /dev/hda2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Moving initrd to /mnt
Mounting devfs:
Executing /sbin/init...
INIT: version 2.78 booting
Activating swap...
EXT3-fs warning: maximal mount count reached, running e2fsck is
recommended
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
Mounting local filesystems...
devpts on /dev/pts type devpts (rw,mode=0622)
/devfs on /devfs type devfs (rw)
mount: proc already mounted
Calculating module dependencies... done.
Loading modules: apm apm: BIOS version 1.2 Flags 0x02 (Driver version
1.13)
h3600_ts modprobe: Can't locate module h3600_ts
sa1100-rtc modprobe: Can't locate module sa1100-rtc
h3600-sleeve modprobe: Can't locate module h3600-sleeve
h3600_generic_sleeve modprobe: Can't locate module h3600_generic_sleeve
h3600-uda1341 modprobe: Can't locate module h3600-uda1341

Setting up some devices: done.
Setting the System Clock using the Hardware Clock as reference...
INIT: Entering runlevel: 2
Flushing initrd: done.
Configuring network interfaces: /etc/network/ifstate: No such file or
directory
done.
Starting PCMCIA services: cardmgr.
cardmgr[89]: starting, version is 3.1.22
cardmgr[89]: watching 2 sockets
cardmgr[89]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter
cardmgr[89]: executing: 'modprobe orinoco_cs'
cardmgr[89]: executing: './network start eth0'
/etc/rc2.d/S50ssh: expr: command not found
Starting OpenBSD Secure Shell server: sshd.
cardmgr[89]: + Usage: iwconfig interface [essid {NN|on|off}]
cardmgr[89]: +[nwid {NN|on|off}]
cardmgr[89]: +[freq N.NNNN[k|M|G]]
cardmgr[89]: +[channel N]
cardmgr[89]: +[sens N]
cardmgr[89]: +[nick N]
cardmgr[89]: +[rate {N|auto|fixed}]
cardmgr[89]: +[rts {N|auto|fixed|off}]
cardmgr[89]: +[frag {N|auto|fixed|off}]
cardmgr[89]: +[enc NNNN-NNNN]
cardmgr[89]: +[power { period N|timeout N}]
cardmgr[89]: +[txpower N {mW|dBm}]
Starting X...
iPAQ 3700
Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/,
removing from
 list!
cardmgr[89]: socket 1: ATA/IDE Fixed Disk
cardmgr[89]: 'ide-cs' already bound to socket 1
cardmgr[89]: executing: './ide start hda'

familiar login: root
Password:
PAM_unix[147]: (login) session opened for user root by LOGIN(uid=0)
login[147]: ROOT LOGIN on `ttySA0'

sh-2.03# uname -a
Linux familiar 2.4.18-rmk3 #1 Sat Apr 13 20:48:23 PDT 2002 armv4l unknown
sh-2.03# locate
Usage: locate [-d path | --database=path] [--version] [--help]
[-e | --existing] pattern...
sh-2.03# updatedb
invalidate: busy buffer
<snip>
invalidate: busy buffer
 /dev/ide/host0/bus0/target0/lun0: p1 p2
invalidate: busy buffer
<snip>
invalidate: busy buffer
 /dev/ide/host0/bus0/target0/lun0: p1 p2
invalidate: busy buffer
<snip>
invalidate: busy buffer
VFS: busy inodes on changed media..
invalidate: busy buffer
<snip>
invalidate: busy buffer
 /dev/ide/host0/bus0/target0/lun0: p1 p2
invalidate: busy buffer
<snip>
invalidate: busy buffer
 /dev/ide/host0/bus0/target0/lun0:hda2: bad access: block=3472, count=8
end_request: I/O error, dev 03:02 (hda), sector 3472
journal_bmap: journal block not found at offset 231 on ide0(3,2)
Aborting journal on device ide0(3,2).
hda2: bad access: block=3376, count=8
end_request: I/O error, dev 03:02 (hda), sector 3376
 p1 p2
invalidate: busy buffer
<snip>
invalidate: busy buffer
 /dev/ide/host0/bus0/target0/lun0: p1 p2
invalidate: busy buffer
<snip>
invalidate: busy buffer
VFS: busy inodes on changed media..
invalidate: busy buffer
<snip>
invalidate: busy buffer
 /dev/ide/host0/bus0/target0/lun0: p1 p2
ext3_abort called.
EXT3-fs abort (device ide0(3,2)): ext3_journal_start: Detected aborted
journal
Remounting filesystem read-only

sort: /tmp/sort0017200000: Read-only file systEXT3-fs error (device
ide0(3,2)) i
n start_transaction: Journal has aborted
em
updatedb: new database would be empty
rm: cannot unlink `/var/lib/locate/locatedb.n': Read-only file system
sh-2.03#
Received on Wed Apr 17 21:04:57 2002