RE: [iPAQ] Using bootldr with USB cradle

There is a procedure described for converting a usb cradle to a serial or dual usb/serial cradle.

Here's a note I found about it:

http://www.handhelds.org/pipermail/ipaq/2001-June/007462.html

Jamey

> -----Original Message-----
> From: Paul Brown [mailto:jedi-knight@mindspring.com]
> Sent: Wednesday, March 27, 2002 5:26 PM
> To: ipaq@handhelds.org
> Subject: [iPAQ] Using bootldr with USB cradle
>
>
> I have an iPaq 2760 w/ a USB cradle. I am not able to get a boot>
> prompt. In the installation instructions there is a line that states
> "You will not see the boot> prompt unless you have the iPAQ
> attached to
> a host computer via either a serial cable or a serial cradle with a
> terminal emulator such as Hyperterminal or minicom." Is there a
> workaround for the USB cradle?
>
> Paul
>
> _______________________________________________
> Open Source Software for Compaq iPAQ Handhelds.
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
>
Received on Wed Mar 27 22:34:00 2002