I'd like to move onto configuring PPP
could someone confirm that it looks as though everything is ok and that
I should proceed? (I've found ppp a problem in the past)
Please refer to the (attached) boot file and the following from minicom:
familiar login: root
Password:
PAM_unix[79]: (login) session opened for user root by LOGIN(uid=0)
login[79]:ROOT LOGIN on 'ttySA0'
#ipkg install_pending
/usr/bin/ipkg: cannot open /etc/ipkg.conf: no such file
#
thanks
-- j.chetwynd@btinternet.com http://www.peepo.com "enjoy surfing the net" http://www.learningdifficulty.org
addr: 00530000 data: FFFFFFFF
verifying ...
formatting ... done.
boot> boot
booting jffs2...
booting boot/zImage from partition >root<
Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
build_list: max = 01F7FFBC .
dir entries = 000002FD
frag entries = 00000B43
+4 increments = 00000000
+file_offset increments = 00000E40
loaded file of size = 0x0008FCC0 at location 0xC0008000
kernel partition base C0008000
kernel_magic=E1A00000
kernel_region_words[9]=016F2818
Linux ELF flash_imgstart=50040000 size=01F80000 dest=C0000000 offset=00008000 MMU Control=C19F4071
MMU PIDVAM=00000000 Skipping kernel copy by request.
C0008000: E1A00000 C0008004: E1A00000
C0008008: E1A00000 C000800C: E1A00000
C0008010: E1A00000 C0008014: E1A00000
C0008018: E1A00000 C000801C: E1A00000
C0008020: EA000002 C0008024: 016F2818
root_filesystem_name=ramdisk Grabbed linuxargs, argc = 00000001
Using mach_type 00000089 setting boot parameters to
noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttySA0 Makeing core tag at C0000100
Makeing cmdline tag at C0000114 Makeing mem32 tag at C00001B4
Makeing ptable tag at C00001C4 dram_size=04000000
nr_pages=54410001 command line is: mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x01F8000Disabling LCD controller
linuxEntryPoint=C0008000 Booting Linux image
Uncompressing Linux.......................................... done, booting the.Linux version 2.4.17-rmk4 (andyc@rockhopper.crl.dec.com) (gcc version 2.95.2 192Processor: Intel StrongARM-1110 revision 8
Architecture: Compaq iPAQ H3800 On node 0 totalpages: 16384
zone(0): 16384 pages. zone(1): 0 pages.
zone(2): 0 pages. Kernel command line: mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x010Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS Memory: 64MB = 64MB total
Memory: 63052KB available (1092K code, 259K data, 60K init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket
CPU clock: 206.400 MHz (0.000-206.400 MHz) Starting kswapd
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
Console: switching to colour frame buffer device 40x30 iPAQ H3600 keyboard driver v1.0
pty: 256 Unix98 ptys configured block: 128 slots per queue, batch=32
SA1100 flash: probing 32-bit flash bus parse_bootldr_partitions: magic=0x646c7470
parse_bootldr_partitions: numPartitions=0x3 parse_bootldr_partitions: npartitions=0x3
partition bootldr o=0 s=40000 partition root o=40000 s=1f80000
partition asset o=1fc0000 s=40000 Using Compaq bootldr partition definition
Creating 3 MTD partitions on "SA1100 flash": 0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr 0x00040000-0x01fc0000 : "root"
mtd: Giving out device 1 to root 0x01fc0000-0x02000000 : "asset"
mtd: Giving out device 2 to asset NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096) IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com mtdblock_open
ok Child dir "." (ino #1) of dir ino #1 appears to be a hard link
VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev
Freeing init memory: 60K Setting up RAMFS, please wait...
Seetting up some vices Executing /sbin/init...
INIT: version 2.78 booting Mounting local filesystems...
mount: tmpfs already mounted on /mnt/ramfs devpts on /dev/pts type devpts (rw,mode=0622)
mount: proc already mounted Calculating module dependencies... depmod: *** Unresolved symbols in /lib/modulodone.
Loading modules: apm H3600 Registering HAL abstraction layer *** AC Power = 1
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13) h3600_ts h3600_ts_init_module: registering char device
sa1100-rtc SA1100 Real Time Clock driver v1.00
h3600-sleeve init_module successful init major= 0
h3600_generic_sleeve Serial driver version 5.05c (2001-07-08) with no serial opdLinux Kernel Card Services 3.1.22
options: [pm]
SA-1100 PCMCIA (CS release 3.1.22)
h3600-uda1341 modprobe: modprobe: Can't locate module l3-bit-sa1100-gpio
h3600_sleeve_insert: vendorid=0x0 devid=0x0
h3600_sleeve_insert: unrecognized sleeve
l3_attach_client: unable to get adapter: l3-bit-sa1100-gpio
/lib/modules/2.4.17-rmk4/kernel/drivers/sound/h3600-uda1341.o: init_module: No yHint: insmod errors can be caused by incorrect module parameters, including invs/lib/modules/2.4.17-rmk4/kernel/drivers/sound/h3600-uda1341.o: insmod /lib/modud/lib/modules/2.4.17-rmk4/kernel/drivers/sound/h3600-uda1341.o: insmod h3600-udad
Setting the System Clock using the Hardware Clock as reference...
INIT: Entering runlevel: 2
Configuring network interfaces: done.
Starting PCMCIA services: modulesinsmod: a module named pcmcia_core already exisinsmod: a module named sa1100_cs already exists
cardmgr.
cardmgr[78]: starting, version is 3.1.22
ï.Sïí....§..ÿB..b.Æ..ÿÅçôìç..à...dò..
Received on Sun Feb 3 07:40:47 2002
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:44:28 EDT