RE: [iPAQ] Ipaq 3650

With bootldr 2.18.01, can download gzipped image:
http://www.handhelds.org/projects/wincerestoration.html

        cat flash_00[048c]00000.bin > flash.bin
Now skip over the parrot firmware. You can restore parrot firmware if
you want AFTER you have verified that wince restoration was correct:

        dd if=flash.bin of=wince.bin bs=1k skip=256

wince.bin should be 16515072 bytes.

        gzip wince.bin

wince.bin.gz should be a little over 9MB.

Now, use the 'load root' command in bootldr-2.18.01 and xmodem transfer
wince.bin.gz to the iPAQ. After it is transferred, the bootldr will
unzip and verify the CRC of the image and then program flash.

Now 'boot wince' should successfully boot wince.

Jamey

> -----Original Message-----
> From: chris carlisle [mailto:knight@enjet.com]
> Sent: Friday, February 01, 2002 3:02 PM
> To: ipaq@handhelds.org
> Subject: [iPAQ] Ipaq 3650
>
>
> after a successful install of PocketLinux I wanted to go back
> to PPC... Used
> backup method before Linux to create 4 *.bin files... After
> upload of each
> .bin file, per instructions, I tried to boot Ipaq by typing
> "load wince" and
> it replied "lcd off" or something like that... anyway, like
> it said, the LCD
> on the IPAQ went off and I had to reset with Joypad pressed
> to get it back
> to where I started... Can you help me?
>
> -Chris
> Desparate Flasher?
>
> _______________________________________________
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
>
Received on Fri Feb 1 13:56:34 2002