Re: [iPAQ] QPE/Qtopida Desktop connection problems

Can somebody post their conenction scripts from the ipaq side as well as
their pc side.
/etc/ppp/options and /etc/ppp/peers/pda from both....
/etc/inittab from ipaq side. I'm having a heck of a time getting the
desktop to connect.

Any weird commands used to start up ppp???

Works fine not using the desktop but qtopia desktop just continually kills
and restarts the ppp connection.

Thanks for any help.
Dave

David_Won@hcm.honda.com@handhelds.org on 01/16/2002 10:15:59 AM

Sent by: ipaq-admin@handhelds.org

To: ipaq@handhelds.org
cc: (bcc: David Won/HCM/AM/HONDA)
Subject: [iPAQ] QPE/Qtopida Desktop connection problems

I am having problems getting the desktop to connect to my Ipaq.
I can so a ppp connection manually and it works fine.
I have the masquerading working and can see the internet from my ipaq and
install packages.
Below is the output from my console when starting it.

 pppd call ipaq
Serial connection established.
Using interface ppp0
Connect: ppp0 <--> /dev/ttyS0
not replacing existing default route to eth0 [207.130.129.1]
local IP address 192.168.1.200
remote IP address 192.168.1.201
Deflate (15) compression enabled

Here is the output from /var/log/messages
Jan 15 18:59:31 islapn34 pppd[2312]: pppd 2.4.1 started by is002430, uid 0
Jan 15 18:59:31 islapn34 pppd[2312]: Serial connection established.
Jan 15 18:59:31 islapn34 pppd[2312]: Using interface ppp0
Jan 15 18:59:31 islapn34 pppd[2312]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 18:59:41 islapn34 kernel: PPP BSD Compression module registered
Jan 15 18:59:41 islapn34 kernel: PPP Deflate Compression module registered
Jan 15 18:59:41 islapn34 pppd[2312]: not replacing existing default route
to eth0 [207.130.129.1]
Jan 15 18:59:41 islapn34 pppd[2312]: local IP address 192.168.1.200
Jan 15 18:59:41 islapn34 pppd[2312]: remote IP address 192.168.1.201
Jan 15 18:59:44 islapn34 pppd[2312]: Deflate (15) compression enabled

As soon as I start the desktop it kills this connection and then reconnects
again. Once that connection is established
it kills it again and starts over.

Jan 15 18:59:58 islapn34 pppd[2336]: pppd 2.4.1 started by root, uid 0
Jan 15 18:59:58 islapn34 pppd[2336]: Device ttyS0 is locked by pid 2312
Jan 15 18:59:58 islapn34 pppd[2336]: Exit.
Jan 15 18:59:58 islapn34 pppd[2312]: Terminating on signal 15.
Jan 15 18:59:58 islapn34 pppd[2312]: Connection terminated.
Jan 15 18:59:58 islapn34 pppd[2312]: Connect time 0.5 minutes.
Jan 15 18:59:58 islapn34 pppd[2312]: Sent 137 bytes, received 117 bytes.
Jan 15 18:59:59 islapn34 pppd[2346]: pppd 2.4.1 started by root, uid 0
Jan 15 18:59:59 islapn34 pppd[2312]: Exit.
Jan 15 18:59:59 islapn34 pppd[2346]: Serial connection established.
Jan 15 18:59:59 islapn34 pppd[2346]: Using interface ppp0
Jan 15 18:59:59 islapn34 pppd[2346]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 19:00:09 islapn34 pppd[2346]: Terminating on signal 15.
Jan 15 19:00:15 islapn34 pppd[2346]: Connection terminated.
Jan 15 19:00:15 islapn34 pppd[2346]: Exit.

If I issue
"pppd defaultroute usepeerdns"
on the ipaq side instead of using the qtopia ppp qui then it get's an IP
address on each
connection but still drops it as soon as it is connected and starts over.

Jan 15 19:08:49 islapn34 pppd[2592]: Serial connection established.
Jan 15 19:08:49 islapn34 pppd[2592]: Using interface ppp0
Jan 15 19:08:49 islapn34 pppd[2592]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 19:08:53 islapn34 pppd[2592]: Deflate (15) compression enabled
Jan 15 19:08:53 islapn34 pppd[2592]: not replacing existing default route
to eth0 [207.130.129.1]
Jan 15 19:08:53 islapn34 pppd[2592]: local IP address 192.168.1.200
Jan 15 19:08:53 islapn34 pppd[2592]: remote IP address 192.168.1.201
Jan 15 19:08:53 islapn34 pppd[2592]: Terminating on signal 15.
Jan 15 19:08:53 islapn34 pppd[2592]: Connection terminated.
Jan 15 19:08:53 islapn34 pppd[2592]: Connect time 0.1 minutes.
Jan 15 19:08:53 islapn34 pppd[2592]: Sent 148 bytes, received 146 bytes.
Jan 15 19:08:53 islapn34 pppd[2592]: Exit.
Jan 15 19:09:14 islapn34 pppd[2681]: pppd 2.4.1 started by root, uid 0
Jan 15 19:09:14 islapn34 pppd[2681]: Serial connection established.
Jan 15 19:09:14 islapn34 pppd[2681]: Using interface ppp0
Jan 15 19:09:14 islapn34 pppd[2681]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 19:09:18 islapn34 pppd[2681]: Deflate (15) compression enabled
Jan 15 19:09:18 islapn34 pppd[2681]: not replacing existing default route
to eth0 [207.130.129.1]
Jan 15 19:09:18 islapn34 pppd[2681]: local IP address 192.168.1.200
Jan 15 19:09:18 islapn34 pppd[2681]: remote IP address 192.168.1.201
Jan 15 19:09:18 islapn34 pppd[2681]: Terminating on signal 15.
Jan 15 19:09:18 islapn34 pppd[2681]: Connection terminated.
Jan 15 19:09:18 islapn34 pppd[2681]: Connect time 0.1 minutes.
Jan 15 19:09:18 islapn34 pppd[2681]: Sent 148 bytes, received 146 bytes.
Jan 15 19:09:18 islapn34 pppd[2681]: Exit.

The qtopia desktop is configured with the right IP and is set for serial.
Should I be using the qtopia ppp gui and should it have ppp as the
username?
Currently it is blank in the user fields.
When I use it I don't get the ip's assigned and the syslog shows.

Jan 15 18:59:59 islapn34 pppd[2346]: Serial connection established.
Jan 15 18:59:59 islapn34 pppd[2346]: Using interface ppp0
Jan 15 18:59:59 islapn34 pppd[2346]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 19:00:09 islapn34 pppd[2346]: Terminating on signal 15.
Jan 15 19:00:15 islapn34 pppd[2346]: Connection terminated.
Jan 15 19:00:15 islapn34 pppd[2346]: Exit.
Jan 15 19:00:15 islapn34 pppd[2379]: pppd 2.4.1 started by root, uid 0
Jan 15 19:00:15 islapn34 pppd[2379]: Serial connection established.
Jan 15 19:00:15 islapn34 pppd[2379]: Using interface ppp0
Jan 15 19:00:15 islapn34 pppd[2379]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 19:00:25 islapn34 pppd[2379]: Terminating on signal 15.
Jan 15 19:00:31 islapn34 pppd[2379]: Connection terminated.
Jan 15 19:00:31 islapn34 pppd[2379]: Exit.
Jan 15 19:00:31 islapn34 pppd[2406]: pppd 2.4.1 started by root, uid 0
Jan 15 19:00:31 islapn34 pppd[2406]: Serial connection established.
Jan 15 19:00:31 islapn34 pppd[2406]: Using interface ppp0
Jan 15 19:00:31 islapn34 pppd[2406]: Connect: ppp0 <--> /dev/ttyS0
Jan 15 19:00:41 islapn34 pppd[2406]: Terminating on signal 15.
Jan 15 19:00:47 islapn34 pppd[2406]: Connection terminated.
Jan 15 19:00:47 islapn34 pppd[2406]: Exit.

Here are my scripts used to connect.

 /etc/ppp/peers/ipaq
-detach
local
nocrtscts
lock
/dev/ttyS0
connect '/usr/sbin/chat -f /etc/ppp/scripts/winserver.chat'
115200
192.168.1.200:192.168.1.201

and
/etc/ppp/scripts/winserver.chat
TIMEOUT 10
'' CLIENT\c

Any ideas on what may be happening or how I should approach fixing it?

Thanks for any help.

Dave

_______________________________________________
iPAQ mailing list
iPAQ@handhelds.org
http://handhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq
Received on Fri Jan 18 07:16:26 2002