A.Schroeter@DKFZ-Heidelberg.de wrote:
> i have a compaq wl100 and a wavelan card.
>
> what version can i use to get any of this cards working for some demos ?
Assuming that the H3600 power supply is butch enough to drive a WaveLAN (330mA @ 5V), the
wvlan_cs driver from Card Services is likely to work with minor changes. When I ported
the proprietary Lucent HCF driver to the SA-1100, all I needed to do was change the data
type used to represent I/O addresses (16-bit to 32-bit).
Your first experiment should be to insert the card into your machine and see if cardmgr
can identify it. (The Intel development board for the SA-1110/SA-1111 can't dump the
WaveLAN/IEEE CIS.)
Good luck,
-jd
Received on Thu Oct 5 09:06:38 2000
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:43:43 EDT