Have installed Familiar v0.5.1 and trying to get the intimate to run.
Have ran the intimate install and apart from not configuring the SSH2, (as I am
using the ssh and not an ethernet connection), all is reported as well, but
after boot I have no menu and only the cursor.
Have the following error on boot after doing install:
...
...
...
Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/, removing
from!Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/,
removing fro!failed to open catalog, using default messages
BScreen::BScreen: managing screen 0 using visual 0x21, depth 16
Debian GNU/Linux testing/unstable intimate ttySA0
intimate login: BScreen::LoadStyle(): couldn't load font 'lucidasans-7'
BScreen:.
Ayone any ideas.
Have included the full boot up sequesnc below.
Thanks
Leo
_________________________________________________________________
Rebooting... Restarting system.
Uncompressing Linux.......................................... done, booting
the.Linux version 2.4.16-rmk1 (jamey@rockhopper.crl.dec.com) (gcc version
2.95.3 202Processor: Intel StrongARM-1110 revision 8
Architecture: Compaq iPAQ H3600
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x000Console: colour
dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 64MB = 64MB total
Memory: 63048KB available (1088K code, 263K data, 60K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (0.000-206.400 MHz)
Starting kswapd
devfs: v0.120 (20011103) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
Console: switching to colour frame buffer device 40x30
iPAQ H3600 keyboard driver v1.0
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=32
SA1100 flash: probing 32-bit flash bus
parse_bootldr_partitions: magic=0x646c7470
parse_bootldr_partitions: numPartitions=0x2
parse_bootldr_partitions: npartitions=0x2
partition bootldr o=0 s=40000
partition root o=40000 s=fc0000
Using Compaq bootldr partition definition
Creating 2 MTD partitions on "SA1100 flash":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x01000000 : "root"
mtd: Giving out device 1 to root
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
mtdblock_open
ok
Child dir "." (ino #1) of dir ino #1 appears to be a hard link
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 60K
Mounting /proc
Linux Kernel Card Services 3.1.22
options: [pm]
/lib/modules/2.4.16-rmk1/kernel/drivers/pcmcia/sa1100_cs.o: invalid parameter
py/lib/modules/2.4.16-rmk1/kernel/drivers/pcmcia/sa1100_cs.o: insmod
/lib/modulesd/lib/modules/2.4.16-rmk1/kernel/drivers/pcmcia/sa1100_cs.o: insmod
sa1100_cs fadSA-1100 PCMCIA (CS release 3.1.22)
H3600 Registering HAL abstraction layer
h3600_micro_setup: setting up microcontroller interface
init_module successful init major= 0
h3600_ts_init_module: registering char device
h3600_sleeve_insert: vendorid=0x1125 devid=0x1
run_sbin_hotplug:78 * hotplug_path=/sbin/hotplug
h3600_sleeve_insert: matched driver Compaq Dual PC Card Sleeve
cardmgr[29]: starting, version is 3.1.22
cardmgr[29]: watching 2 sockets
cardmgr[29]: exiting
-- -----------------------------------------------
What would you like to do?
CAL = INTIMATE (normal)
TEL = FAMILIAR
Q = INTIMATE using the BIND method
--> = REBOOT
cardmgr[46]: starting, version is 3.1.22
cardmgr[46]: watching 2 sockets
cardmgr[46]: socket 0: ATA/IDE Fixed Disk
cardmgr[46]: executing: 'modprobe ide-cs'
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Trying to free nonexistent resource <f6000000-f600000f>
hda: IBM-DSCM-11000, ATA DISK drive
ide0 at 0xf6000000-0xf6000007,0xf600000e on irq 42
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
cardmgr[46]: executing: './ide start hda'
hda: bad special flag: 0x03
cardmgr[46]: socket 1: ATA/IDE Fixed Disk
Trying to free nonexistent resource <f7000000-f700000f>
hdc: SanDisk SDCFB-96, ATA DISK drive
ide1 at 0xf7000000-0xf7000007,0xf700000e on irq 32
ide_cs: hdc: Vcc = 3.3, Vpp = 0.0
cardmgr[46]: executing: './ide start hdc'
hdc: bad special flag: 0x03
cardmgr[46]: exiting
intimate
hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
hdc: 187904 sectors (96 MB) w/1KiB Cache, CHS=734/8/32
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host1/bus0/target0/lun0: p1
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target0/lun0: p1 p2
/dev/ide/host0/bus0/target0/lun0: p1 p2
reiserfs: checking transaction log (device 03:01) ...
reiserfs: replayed 8 transactions in 9 seconds
Using r5 hash to sort names
ReiserFS version 3.6.25
Booting intimate from microdrive...
Setting up pm off flash
Executing /sbin/init...
INIT: version 2.83 booting
mtdblock_release
ok
Setting CPU Speed
insmod: cpu-scale: no module by that name found
Activating swap.
Adding Swap: 30236k swap-space (priority -1)
Checking root file system...
fsck 1.25 (20-Sep-2001)
fsck: fsck.reiserfs: not found
fsck: Error 2 while executing fsck.reiserfs for
/dev/ide/host0/bus0/target0/lun1System time was Sat Dec 1 19:45:47 UTC 2018.
Setting the System Clock using the Hardware Clock as reference...
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
System Clock set. System local time is now Sat Dec 1 19:45:47 UTC 2018.
Calculating module dependencies... done.
Loading modules: apm Warning: loading
/lib/modules/2.4.16-rmk1/kernel/arch/arm/).o will taint the kernel: no license
h3600_ts sa1100-rtc Warning: loading
/lib/modules/2.4.16-rmk1/kernel/drivers/ch0ll taint the kernel: no license
slhc CSLIP: code copyright 1989 Regents of the University of California
ppp_generic PPP generic driver version 2.4.1
devfs: devfs_register(): device already registered: "ppp"
ppp_async
Checking all file systems...
fsck 1.25 (20-Sep-2001)
Setting kernel variables.
Loading the saved-state of the serial devices...
Illegal UART type: undefined/dev/ttySA0 at 0x0000 (irq = 17) is a undefined
/dev/ttySA1: No such file or directory
/dev/ttySA1: No such file or directory
/dev/ttySA2: No such file or directory
/dev/ttySA2: No such file or directory
Mounting local filesystems...
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: done.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Sat Dec 1 20:45:57 CET 2018
Running ntpdate to synchronize clock.
Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting internet superserver: inetd.
Starting Secure Shell server v2: sshd2: SSH Secure Shell 2.4.0 (non-commercial
usshd2.
Starting X...
Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/, removing
from!Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/,
removing fro!Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/,
removing from!Could not init font path element
/usr/X11R6/lib/X11/fonts/100dpi/, removing fro!/etc/rc2.d/S99x:
/etc/X11/Xdefaults: No such file or directory
Could not init font path element /usr/X11R6/lib/X11/fonts/75dpi/, removing
from!Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/,
removing fro!failed to open catalog, using default messages
BScreen::BScreen: managing screen 0 using visual 0x21, depth 16
Debian GNU/Linux testing/unstable intimate ttySA0
intimate login: BScreen::LoadStyle(): couldn't load font 'lucidasans-7'
BScreen:.
=====
Home Belgium: +32 (0)10 86 79 50
Mobile Belgium: +32 (0)495 89 59 65
Mobile France: +33 (0)6 747 66 44 2
Registered Linux User Number 205935.
http://counter.li.org.
__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
from News and Sport to Email and Music Charts
http://uk.my.yahoo.com
Received on Tue Apr 16 11:44:37 2002
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:42:40 EDT