Re: hx4700 battery lock switch

> I solved the problem without modifying anything on the board as you
> suggest: I simply glued a bit of plastic (anything small enough to fit
> in the small hole the switch is in, but big enough to keep the switch
> pressed. I used a 2mm long section of electric cable) to a 2-3cm long
> piece of black insulating tape, and put the tape to keep the switch pressed.

    Hi. The problem with mine now is the metal switch was bent and had
come off. I have no idea where it's supposed to be pressing/connecting,
as seen in my photo.

> I hope my solution will be helpful, let me know if it is not clear, I
> could send a picture.

    It would of course be helpful to have a picture, but only if it is
not too troublesome for you. I didn't really want to ask anyone to pull
their device apart for no good reasons :)

    Thanks again.

Pigeon.
Received on Mon Jun 23 2008 - 00:47:41 EDT