Re: Haret boot

Hi,

I just did that.

This changed nothing.

Some seconds...
white flash then black screen with haret text...
3 seconds...
new flash then black screen...
some seconds then backlight shuts down.

The serial line stops after displaying "..........................done,
booting the kernel."
I noticed the device gets very hot, and the flashing yellow led stops
lighting. The device was connected to USB power for charging (I have a
custom cable split between serial and power (with an USB jack) )

I also tried to boot Familiar 0.8.4 kernel, which behaves the same, except
that the final black screen is replaced by a small tux image at top left!
But no progress beyond this!

What SHOULD I see? an on screen fb console? serial line traffic?
I guess that putting haret and zImage in RAM instead of SD card will change
nothing...

(I have windows mobile 2003 SE build 4.21.15045.0 bootloader 1.01 rom
1.10.10 FRE)

Thanks!

2007/9/7, Max Kosmach <max_at_tcen.ru>:
>
> Sébastien Lorquet пишет:
> > set cmdline "root=/dev/hda1 noinitrd console=ttyS1,115200n8"
> try to add mem=64M
>
> --
> With MBR
> Max
> CCSA/CCSE
>

-- 
Sébastien LORQUET - 이세영 (李世榮)
Ingénieur ENSPG 2006 / ENSIMAG-ASI 2007