Le Lundi 18 Avril 2005 23:25, Todd Blumer a écrit :
> Yes, that rebooting problem may be related to the serial cable
> handling that I had for the current starterkit. For now, please
> ensure that your serial cable is attached (it uses COM_DCD_N on ASIC3
> to detect), and that the USB portion is not attached, as the PXA27x
> USB driver has problems. Hope this helps. A new starter kit should be
> available in a few days.
Hello again,
I tried to boot with my other CF card, and the reboot problem didn't
occur... FYI the working card is a PQI hi-speed 128MB card and the
"boot twice" card is a Kingston hi-speed 512MB card.
Also, regarding mu serial cable : I built it myself, and I only wired
Rx, Tx and gnd. It has no USB, and no flow control at all, but "it just
works" with 2.6.11-hh2 ... Only esthetic problem is the "cable not
detected" displayed by kernel and minicom, but I can live with it.
About my problem related to my scrambled framebuffer, do you think that
a dump of my HTC bootloader and WinCE image could help you, if they are
different from yours ?
On the other hand, I can also try to look at it by myself ... it will
just take a little more time ;)
Regards,
Alex
Received on Wed Apr 20 2005 - 17:59:18 EDT
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:21:04 EDT