SDG Bootldr 1.2.1 and PCMCIA

Hi there,

I've got successfully (I hope so) installed the bootloader from SDG on
my hx4700.

-------------------------------------------------------------------------------------
HTC Integrated Re-Flash Utility for bootloader Version:1.37i ROADSTER
DVT
versi

on:1.01
Built at: Jul 16 2004 16:30:44
Copyright (c) 1998-2002 High Tech Computer
Corporation

Turbo Mode Frequency = 0 MHz
Run Mode Frequency = 0 MHz
Main=0x90048EBC
LCD Power ON!
ATI address=0xAB010000
ATI Chip Id=0x57441002
Normal-LCD Power ON!
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from
response.
SD:Detected one card
SD:ready for transfer OK
Total card size=1E3E0000e=0
Flash ID = 89,8816
INTEL StrataFlash 256 Mbit Wireless MEMORY (L30/L18 Bottom type)
found
Flash Updating...
CheckSum is fail! dwCheckSum=FDCFF0DC,
dwCheckSumMemory=F9670BDC

SDCARDS2D: Download to memory fail!
SER>
-------------------------------------------------------------------------------------

But afterwards I cannot load the flashes. After I have loaded the
flash-utility of SDG
I get the message "No PCMCIA card found", everytime I push the recording
button it starts to scan but it didn't find any images (means: the menu
with the "No PCMCIA card found" message returns.

This is the log (from the serial cable). I've tried to start twice the
reflashing (key = 00000006)

-------------------------------------------------------------------------------------
**** SDG Boot Loader for HX4700 ****
Enabling MMU
Identified Flash: 48F4400L0ZB0 (2x16)
Machine type is iPAQ hx4700
SDRAM size: 64 MB (0x04000000)
SDG Boot Loader, Rev 1.2.1-hx4700-hp [BIG_KERNEL] [MONO]
Last link date: Wed Feb 1 13:17:48 EST 2006
Contact: support_at_sdgsystems.com
CPU company: INTEL
CPU Architecture: XScale
CPU Part: PXA270
ARM Processor Rev=00050000
(C) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY
              under the terms of the GNU General Public License.
(C) 2005 SDG Systems, LLC.
Press Return to start the OS now, any other key for command line
DEBUG BOOT: not evaluating params
DEBUG BOOT: use `params eval' to evaluate parameters.
key = 00000006
key = 00000006
-------------------------------------------------------------------------------------

Has anybody an idea how I can start flashing?

Yours

Marc
Received on Fri Feb 24 2006 - 05:03:19 EST