Re: haret boots linux

I think someone with more experience with the hh.org sources should
probably diff through the trees to ensure that I did not do anything
"stupid" with the merge, or maybe even repeat the process with a more
understanding and critical eye toward the changes. It's possible that I
may have dropped some hh.org patches. I can re-iterate what I did, if
necessary. I'm sure I also have some unnecessary code in the hx4700.c
area, but it's a start... Hopefully, we can get a working kernel in the
hh.org CVS tree soon.

I put my sources here: http://sdgsystems.com/pub/ipaq/hx4700/src
Michael, if you have updates, feel free to post them and I'll delete my
source.

So, you're working on getting the g_ether driver working, Michael? I'll
start looking at the video.

--
Todd Blumer (todd_at_sdgsystems.com)
+1-724-452-9366
+1-724-452-6574 (fax)
Michael Opdenacker wrote:
> Hi Todd,
>
> That's fantastic news... congratulations!
> I'll make these sources available on my website, along with guidelines 
> on the Wiki.
>
> What's next? Now, lots of possibilities are open to us.
>
> What about making usb gadget work, so that people with no serial cable 
> can enjoy this too, thanks to the usb-ethernet ("g_ether") driver?
>
> Thanks again!
>
>    :-)
>
>    Michael.
>
>> I did a quick hacked patch of Michael's 2.6.8.1-hh0 kernel + 2.6.9 
>> patches + took-latest-2.6.9 file when compile failed and I am now 
>> booting to a busybox prompt!
>> -- 
>>
>> Todd
>>
>>
>>
>> Michael Opdenacker wrote:
>>
>>>
>>>> Just to say that I tried with the latest mainstream kernel sources 
>>>> (2.6.10-rc3-bk13), still with no luck...
>>>> It's even worse, as I only get the 1st line: "done, booting the 
>>>> kernel", though I activated low-level debugging.
>>>
>>>
>>>
>>>
>>> I don't have more luck with mainstream 2.6.9.
>>>
>>> By the way, I also need to test the same kernel with my h2200. I'm 
>>> not even sure it will even boot fine on it. It could be that the 
>>> issues I was struggling with to boot the h2200 device with 
>>> mainstream 2.6.8.1 are still not solved.
>>>
>>> If this is true, it's even no point trying with the latest 
>>> mainstream 2.6.x version.
>>>
>>> On the contrary, I had no issue booting my h2200 with mainstream 
>>> 2.6.6 (which had no pxa27x support yet, unfortunately).
>>>
>>> I continue my investigations...
>>>
>>> Cheers,
>>>
>>>    Michael.
>>>
>>
>
>