Trying to boot Linux on a HP iPAQ hx2100

Hello,

I'm trying to use the files provided at http://projects.o-hand.com/hx2750 to
boot Linux on a HP iPAQ hx2100 using a SD card.

So far I only have been able to see the kernel init process, but it stops at
this point:

with idebus=xx
mice: PS/2 mouse device common for all mice
tsc2101 touchscreen driver initialized
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
CID dump: 1d414453 4d492020 1000005e 9d00533f
CSD dump: 005e0032 1f5983cf edb6bf87 9640003f
mmcblk0: mmc0:b368 SMI 249856KiB
mmcblk0: p1
RAMDISK: Compressed image found at block 0
ETX2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: mounted root (ext2 filesystem)
Freeing init memory: 80K
2.6. kernels use pcmciatd instead of memory_cs.c and do not require special
MTD handling any more.

Any ideas on what could be wrong? It just hangs there and I have to
hard-reset the device.

I've also tried the files provided at http://nw.distl.net/hx2410, which
should work better with a SD card according to previous messages in this
board, but it hangs when the picture of the bloodshot-eyed penguin is shown.

Thanks for your help,
Diego

-- 
Diego Amores
diego.amores_at_gmail.com
--