>> Note that :
>> - when VGA mirroring is enabled, there is no colored patterns.
>> - when kernelcrc=1, there is no black lines at the end of the pattern
>> (and no crc error accordingly to the log file).
>>
>
> Color code meanings are listed in the big comment block in haret's
> src/linboot.cpp file. The CRC check in the log isn't really a success
> report - it is just calculating the CRC for comparison purposes (one
> can verify the value in the log with the value of 'cksum zImage' on a
> linux machine). Just after writing the yellow line, the preloader
> will retest the relocated kernel's crc value with the one calculated
> (and reported) earlier. If they match, the black line is shown - if
> they don't match a red (or magenta) line is shown. It can take
> several seconds to do the crc from the preloader, so you should wait
> for the black line to show up. If the black line really doesn't
> appear, something _very_ odd is happening.
>
You are right : the blackline appears after about 15 seconds.
Pierre
Received on Sat Jan 13 2007 - 16:49:23 EST
This archive was generated by hypermail 2.2.0 : Sat Jan 13 2007 - 16:49:48 EST