first try with linux on h5550

Hi,

My h5550 arrived today; after playing with the defective demo software
it shipped with, I put the bootloader on it without any trouble:

boot> ver
Compaq OHH BootLoader, Rev 2-21-12 [BIG_KERNEL] [MD5] [MONO]
Last link date: Mon Nov 3 15:33:04 EST 2003
Contact: bootldr_at_handhelds.org

[well, actually I had a great deal of trouble with the wireless eth,
thanks to Wince, and ended up having to use Bluetooth and a mobile phone]

and then did a "load root" and uploaded
bootgpe2-v0.7.2+unstable16-h3900.jffs2. This also seemed to go well,
although an intial boot didn't seem to get the LCD going.

Removing the battery for a few minutes seemed to improve matters, and I
managed to work around the:

familiar login: root
login: no valid shadow password

issue and set a root pw.

Now, on booting, I get the penguin logo, and the the GPE 2.1 banner.
Eventually I get an X cursor, with an alternating light/dark background.
The touchscreen works, in that the X cursor follows my clicks.

At this point I don't seem to be able to do anything graphically. None
of the main buttons do anything, including the power button. The reset
button does what it should, giving me either the familiar prompt or the
bootloader if I hold down the centre button.

I can see that gpe-login is running, but I'm not getting a login screen,
just the alternating light/dark background.

Am I missing something obvious...?

thanks very much for any comments.

cheers,
calum.

~ # ps -ef
   PID Uid VmSize Stat Command
     1 root 488 S init [2]
     2 root SW [keventd]
     3 root SWN [ksoftirqd_CPU0]
     4 root SW [kswapd]
     5 root SW [bdflush]
     6 root SW [kupdated]
     7 root SW [mtdblockd]
     8 root SWN [jffs2_gcd_mtd1]
   109 root SW [khubd]
   136 root SW [kapmd]
   193 root SW [kusb-ethd]
   337 root 536 S /sbin/syslogd -n -C
   339 root 508 S /sbin/klogd -n
   352 messagebuS 956 S [dbus-daemon-1]
   361 root 540 S /usr/sbin/dropbear
   369 root 740 S hcid: processing events
   378 daemon 412 S [portmap]
   387 root 512 S /sbin/sdpd
   463 root 672 S /sbin/cardmgr
   473 root 360 S /usr/sbin/atd /var/spool/at
   480 root 532 S /usr/bin/gpe-dm
   481 root 676 S -sh
   482 root 1364 S Xfbdev -dpi 100 -br -rgba rgb :0 -noreset
  2673 root 520 S run-parts /etc/X11/Xinit.d
  2704 root 2788 S /usr/bin/gpe-login
  2712 root 716 S keylaunch -f /etc/X11/gpe-login.keylaunchrc
  2713 root 728 S ipaq-sleep -u 60 -o 30 -n
  2722 root 1180 R xkbd -xid
  2723 root 632 R ps -ef

~ # dmesg
Linux version 2.4.19-rmk6-pxa1-hh36 (pb_at_dixie) (gcc version 3.3.1
20030720 (prerelease)) #491 Thu Apr 8 00:05:07 BST 2004
CPU: XScale-PXA255 revision 6
Machine: HP iPAQ H5400
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Reserved 4096 bytes at a7fff000 for RTC hack
Restoring saved RCNR value to 1296 (from c7fff000)
On node 0 totalpages: 32768
zone(0): 32768 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
mtdparts=ipaq:0x00040000_at_0x00000000(bootldr)ro,0x01FC0000_at_0x00040000(root)
root=/dev/mtdblock1 init=/linuxrc noinitrd co
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB 64MB = 128MB total
Memory: 128120KB available (1092K code, 331K data, 68K init)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Using PXA255 frequency points.
Registering CPU frequency change support.
CPU clock: 398.131 MHz (99.000-400.000 MHz)
Changing CPU frequency to 398 Mhz (PXbus=196Mhz).
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch_at_atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Console: switching to colour frame buffer device 30x40
mq1100fb: fb0: MQ1100 frame buffer device 240x320-16bpp
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0x0000 (irq = 14) is a PXA UART
ttyS01 at 0x0000 (irq = 13) is a PXA UART
ttyS02 at 0x0000 (irq = 12) is a PXA UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
iPAQ flash: probing 32-bit flash bus, window=c88c2000 with CFI.
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x40000,blocks=128
Using buffer write method
iPAQ flash: found 33554432 bytes
iPAQ flash: probing 32-bit flash bus, window=ca8c2000 with CFI.
IPAQ flash bank 2: Found an alias at 0x1000000 for the chip at 0x0
cfi_cmdset_0001: Erase suspend on write enabled
0: offset=0x0,size=0x40000,blocks=64
Using buffer write method
iPAQ flash: found 16777216 bytes
2 cmdlinepart partitions found on MTD device ipaq
Using dynamic partition definition
Creating 2 MTD partitions on "ipaq":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x02000000 : "root"
mtd: Giving out device 1 to root
Creating 2 MTD partitions on "IPAQ flash bank 2":
0x00000000-0x00fc0000 : "second H3XXX root jffs2"
mtd: Giving out device 2 to second H3XXX root jffs2
0x00fc0000-0x01000000 : "second asset"
mtd: Giving out device 3 to second asset
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
mtdblock_open
ok
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 68K
Warning: unable to open an initial console.
H3600 Registering HAL abstraction layer
selected external charging rate
register_procfs
register_procfs: done
i2c-core.o: i2c core module
uda1380_init:
pxa_uda1380_init
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
at76c503.c: Generic Atmel at76c503/at76c505 routines v0.11beta2
usbdfu.c: USB Device Fimware Upgrade (DFU) handler v0.11beta2
usb.c: registered new driver usbdfu
at76c503-rfmd.c: Atmel at76c503 (RFMD) Wireless LAN Driver v0.11beta2
usb.c: registered new driver at76c503-rfmd
BlueZ Core ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk_at_qualcomm.com>
BlueZ HCI UART driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk_at_qualcomm.com>
BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc
Written 2000,2001 by Maxim Krasnyansky <maxk_at_qualcomm.com>
BlueZ BNEP ver 1.1
Copyright (C) 2001,2002 Inventel Systemes
Written 2001,2002 by Clement Moreau <clement.moreau_at_inventel.fr>
Written 2001,2002 by David Libault <david.libault_at_inventel.fr>
Copyright (C) 2002 Maxim Krasnyanskiy <maxk_at_qualcomm.com>
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
h3600_ts_init_module: registering char device
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
irda_init()
IrCOMM protocol (Dag Brattli)
h5400_control_egpio: card_reset: setp=0
opt_on: gpa=f30c0008 setp=0
opt_nvram_n: before gplr=1c1cc9a setp=0
opt_nvram_n: after gplr=c1cc9a setp=0
SA1100 Real Time Clock driver v1.03
opt_nvram_n: before gplr=1c1cc9a setp=0
opt_nvram_n: after gplr=1c1cc9a setp=0
soft_connect_hook: enable=0 GPDR=1ebfb GPLR=1c1cc9e GAFR=a0000000
PXA USB Controller Core Initialized
usbctl: usb-eth registered.
soft_connect_hook: enable=1 GPDR=1ebff GPLR=1c1cc9a GAFR=a0000000
USB Function Ethernet Driver Interface
pcipool_h5400_init: page->vaddr=d0a0c000 page->dma=14000000
blocks_per_page=8 mapsize=4
h5400_pcibuf: initializing H5400 DMA workaround
usb-ohci.c: USB OHCI at membase 0xd0a1e000, IRQ 120
hc_alloc_ohci: dev=ffff5400 mem_base=d0a1e000 dev_is_h5400=1
calling pci_pool_alloc
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Linux Kernel Card Services 3.1.22
   options: [pm]
<6>Intel PXA250/210 PCMCIA (CS release 3.1.22)
h5400_egpio_irq_number: egpio_nr=15 irq=145
h5400_egpio_irq_number: egpio_nr=16 irq=146
hub.c: USB new device connect on bus1/1, assigned device number 2
at76c503.c: $Id: at76c503.c,v 1.8 2004/02/19 20:48:27 pb Exp $ compiled
Feb 19 2004 20:50:17
at76c503.c: firmware version 0.100.5 #39
at76c503.c: device's MAC 00:02:8a:fa:64:d9, regulatory domain MKK1
(Japan) (id 65)
at76c503.c: registered wlan0
Received on Thu Aug 05 2004 - 23:03:43 EDT