J.Manrique Lopez wrote:
> --- Epelde Gorka <GEpelde_at_ikerlan.es> escribió: > At
> the boot prompt write "set
>>
> kernel_filename=/boot/zImage-2.4.19-rmk6-pxa1-hh36.10"
>>
>> boot> set
>>
> kernel_filename=/boot/zImage-2.4.19-rmk6-pxa1-hh36.10
>>
>> and then boot
>>
>> boot> boot
>>
>> It should work.
>
> Yes, it works, but how to make that change for ever.
>
> With h5450 using wifi, there is very usual to reboot
> the unit to make it work again.
>
> Thanks and best regards,
>
> =====
> J.Manrique Lopez de la Fuente http://www.asturlinux.org/~jsmanrique
> Jabber: jsmanrique_at_jabber.org || ICQ: 167 680 362
> 1077 HPCC Member http://www.hpcc.org
> AsturLiNUX & HispaLiNUX Member
>
>
>
> ______________________________________________________________________
> Correo Yahoo! - 6MB, más protección contra el spam ¡Gratis!
> http://correo.yahoo.es
Once you have booted the Ipaq. Go to /boot directory
1.- rm zImage -> Remove the actual symlink to the kernel image Which is
linking a not existing kernel
2.- ln -s zImage-ipaqpxa-2.4.19-rmk6-pxa1-hh36.10 zImage -> Create the
symlink to the zImage
and reboot. It should work.
Received on Wed Jun 02 2004 - 02:24:11 EDT
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:20:10 EDT