RE: Familiar on 5450 - Kernel upgrade

This kind of effects have happened to me many times. I had to plug to cradle
(to charge the battery)and leave it for a good time.
And sometimes when i plug it for the first time it starts to vibrate,
without stopping. In this case i had to take off the battery let it rest an
try again, doing this last step again if doesn't work.

-----Mensaje original-----
De: J.Manrique Lopez [mailto:jsmanrique_lopez_at_yahoo.es]
Enviado el: martes, 01 de junio de 2004 10:05
Para: Epelde Gorka; Ross Golder
CC: h5400-port_at_handhelds.org
Asunto: RE: [H5400-port] Familiar on 5450 - Kernel upgrade

I have reflashed the unit, even the bootldr.

I have installed unstable16 image from pb site, but
after a day of use, the ipaq has hanged and now it
doesn't boot anymore. Very strange, it seems like it
has drained the battery.

Very, very strange. I hope I haven't losed my ipaq :(

 --- Epelde Gorka <GEpelde_at_ikerlan.es> escribió: > At
the boot prompt write "set
>
kernel_filename=/boot/zImage-2.4.19-rmk6-pxa1-hh36.10"
>
> boot> set
>
kernel_filename=/boot/zImage-2.4.19-rmk6-pxa1-hh36.10
>
> and then boot
>
> boot> boot
>
> It should work.
>
>
_______________________________________________________________________
>
> Gorka Epelde
> Komunikazioak alorra
> IKERLAN
> P J. M. Arizmendiarrieta, 2
> 20500 Arrasate (Gipuzkoa)
> Tel.: +34 943 71 24 00 Fax: +34 943 79 69 44
> E-mail: gepelde_at_ikerlan.es http:
> www.ikerlan.es
>
_______________________________________________________________________
>
>
> -----Mensaje original-----
> De: Ross Golder [mailto:ross_at_golder.org]
> Enviado el: sábado, 29 de mayo de 2004 3:49
> Para: J.Manrique Lopez
> CC: h5400-port_at_handhelds.org
> Asunto: RE: [H5400-port] Familiar on 5450 - Kernel
> upgrade
>
>
> Sorry, I have no idea. I did things a slightly
> different way to this.
> Erik wasn't able to do things the same way I did for
> some reason, so
> this was the way he ended up solving the same
> problem :)
>
> --
> Ross
>
> On ส., 2004-05-29 at 02:30 +0200, J.Manrique Lopez
> wrote:
> > --- erik.chakravarty_at_accenture.com escribió: >
> Hi
> > Ross,
> > >
> > > Thanks for the pointer but this did not work.
> > >
> > > Instead I set the bootloader param
> > > kernel_filename=zImage-2.4.19-rmk6-pxa1-hh36.10
> and
> > > then was able to boot as normal.
> >
> > how to change that?
> >
> > Best regards,
> >
> > =====
> > J.Manrique Lopez de la Fuente
> http://www.asturlinux.org/~jsmanrique
> > Jabber: jsmanrique_at_jabber.org || ICQ: 167 680 362
> > 1077 HPCC Member http://www.hpcc.org
> > AsturLiNUX & HispaLiNUX Member
> >
> >
> >
> >
>
______________________________________________________________________
> > Correo Yahoo! - 6MB, más protección contra el
> spam ¡Gratis!
> > http://correo.yahoo.es
> > _______________________________________________
> > H5400-port mailing list
> > H5400-port_at_handhelds.org
> >
>
https://www.handhelds.org/mailman/listinfo/h5400-port
>
> _______________________________________________
> H5400-port mailing list
> H5400-port_at_handhelds.org
>
https://www.handhelds.org/mailman/listinfo/h5400-port

=====
J.Manrique Lopez de la Fuente http://www.asturlinux.org/~jsmanrique
Jabber: jsmanrique_at_jabber.org || ICQ: 167 680 362
1077 HPCC Member http://www.hpcc.org
AsturLiNUX & HispaLiNUX Member

                
______________________________________________________________________
Correo Yahoo! - 6MB, más protección contra el spam ¡Gratis!
http://correo.yahoo.es
Received on Tue Jun 01 2004 - 04:11:10 EDT