Re: RE: H5400-port Digest, Vol 10, Issue 17

Sounds like the image you're installing may be defective, or for the
wrong architecture. Which .jffs2 file are you using, precisely?

p.

On Wed, 2004-01-28 at 14:09, Rolando wrote:
> Hi,
>
> I've the same problem with a 5450. Even after being able to start the
> boot with the black screen, it just gets stuck and doesn't boot Opie.
> Tried to reflash it, same happened.
>
> Well, I even tried to restore Wince.gz back up boot, with no success,
> file to large.
> Need help for the two situations.
>
> Thank's in advance.
> Rolando Oliveira
>
>
>
> -----Original Message-----
> From: h5400-port-bounces@handhelds.org
> [mailto:h5400-port-bounces@handhelds.org] On Behalf Of
> h5400-port-request@handhelds.org
> Sent: terça-feira, 27 de Janeiro de 2004 17:01
> To: h5400-port@handhelds.org
> Subject: H5400-port Digest, Vol 10, Issue 17
>
>
> Send H5400-port mailing list submissions to
> h5400-port@handhelds.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://www.handhelds.org/mailman/listinfo/h5400-port
> or, via email, send a message with subject or body 'help' to
> h5400-port-request@handhelds.org
>
> You can reach the person managing the list at
> h5400-port-owner@handhelds.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of H5400-port digest..."
>
>
> Today's Topics:
>
> 1. HH36 Toasts Ipaq ? (Matthew Allum)
> 2. Re: HH36 Toasts Ipaq ? (Samir Patel)
>
>
> ----------------------------------------------------------------------
>
> Date: Mon, 26 Jan 2004 21:02:57 +0000
> From: Matthew Allum <mallum@openedhand.com>
> To: h5400-port@handhelds.org
> Subject: [H5400-port] HH36 Toasts Ipaq ?
> Message-ID: <20040126210257.GB16617@www.openedhand.com>
> Content-Type: text/plain; charset=us-ascii
> MIME-Version: 1.0
> Precedence: list
> Message: 1
>
> Hi;
>
> After upgrading to hh36 in unstable, I've had the re-occuring problem of
> my 5550 ending up in a state where it appears dead and takes alot of
> fiddling around to get the reassuring buzz from a reset to happen and
> the unit then come back to life. The dead state usually occurs when I
> put the unit to sleep overnight and then attempt to re-awaken in the
> morning.
>
> However it recently seemed not to charge, with apm always reporting 10%.
> It was recommended to me I let the unit run out of power totally and
> then recharge so it would go into learning state and apm would start
> giving back useful values. I did this and now whatever I try I can not
> seem to get the ipaq to turn back on - very depressing.
>
> It could be that this is a faulty unit, but I ran it with pocketpc for a
> while and all seemed fine - its pretty much not a couple of months old.
>
> Is there anything else I can try or is it time for it to enter my
> expensive growing graveyard of dead ipaqs ( already lost a 3600 and 3870
> to dead batterys :( )
>
> -- Matthew
>
>
>
>
>
> ------------------------------
>
> Date: Mon, 26 Jan 2004 17:23:44 -0500
> From: Samir Patel <packages@allenport.com>
> To: Matthew Allum <mallum@openedhand.com>
> Cc: h5400-port@handhelds.org
> Subject: Re: [H5400-port] HH36 Toasts Ipaq ?
> Message-ID: <1075155823.25955.7.camel@samir>
> In-Reply-To: <20040126210257.GB16617@www.openedhand.com>
> References: <20040126210257.GB16617@www.openedhand.com>
> Content-Type: text/plain
> MIME-Version: 1.0
> Content-Transfer-Encoding: 7bit
> Precedence: list
> Message: 2
>
> As has been reported by other people, and confirmed by me over the
> course of this weekend (unfortunately), the following procedure is
> probably what you want to do:
>
> 1) Put the iPAQ on a charger for about 2 hrs. (Make sure you don't
> press any buttons on the thing during this period).
> 2) Take it off the charger and let it sit for about 45minutes to an hour
> (again... don't press anything).
> 3) Press reset.
> 4) Put back on the charger for about a minute or two.
> 5) After a minute or two has gone by, pressing reset should start the
> thing. You might want to try taking it on and off the charger a few
> times if the reset button doesn't immediately work. Do NOT leave it on
> the charger TOO long after step 3, and do not detach the unit from the
> charger once the unit has done its "vibrating" thing (or else the
> battery might not go into learning mode and you'll have to start the
> whole process all over again...).
>
> To see what the battery is doing... open a terminal and:
>
> "cat > /proc/asic/battery"
>
> Hope that helps,
>
> Samir
>
> On Mon, 2004-01-26 at 16:02, Matthew Allum wrote:
> > Hi;
> >
> > After upgrading to hh36 in unstable, I've had the re-occuring problem
> > of my 5550 ending up in a state where it appears dead and takes alot
> > of fiddling around to get the reassuring buzz from a reset to happen
> > and the unit then come back to life. The dead state usually occurs
> > when I put the unit to sleep overnight and then attempt to re-awaken
> > in the morning.
> >
> > However it recently seemed not to charge, with apm always reporting
> > 10%. It was recommended to me I let the unit run out of power totally
>
> > and then recharge so it would go into learning state and apm would
> > start giving back useful values. I did this and now whatever I try I
> > can not seem to get the ipaq to turn back on - very depressing.
> >
> > It could be that this is a faulty unit, but I ran it with pocketpc for
>
> > a while and all seemed fine - its pretty much not a couple of months
> > old.
> >
> > Is there anything else I can try or is it time for it to enter my
> > expensive growing graveyard of dead ipaqs ( already lost a 3600 and
> > 3870 to dead batterys :( )
> >
> > -- Matthew
> >
> >
> >
> >
> >
> > _______________________________________________
> > H5400-port mailing list
> > H5400-port@handhelds.org
> > https://www.handhelds.org/mailman/listinfo/h5400-port
>
> ------------------------------
>
> _______________________________________________
> H5400-port mailing list
> H5400-port@handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
>
>
> End of H5400-port Digest, Vol 10, Issue 17
> ******************************************
>
> _______________________________________________
> H5400-port mailing list
> H5400-port@handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
Received on Wed Jan 28 22:52:20 2004