Re: Problems compiling kernel

erik_at_hovland.org wrote:
> That message is typically related to not giving a 'root=<something>'
> parameter to the kernel, or no code for the filesystem that the root fs
> is on.
>
> And the two zeros shouldn't be required. But the /dev directory usually
> lists the serial devices with two digits, so that is how I have always
> done it.
>
> E

Sorry if this double-posts; it didn't seem to go through the first time.

I finally enabled enough in the .config to make it boot. Now I have two
more problems:

1) It doesn't seem to see the internal USB, and thus the wireless card

2) It doesn't seem to see my MMC/SD card slot.

I know the problem is probably that I did something dumb and failed to
include a few things in my .config. As for USB, I have a sneaking
suspicion that I need OHCI, which isn't even shown by `make menuconfig`.
  As for MMC/SD, here are the lines of my .config that pertain:
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_PXA=y
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_TMIO=y
CONFIG_MMC_SAMCOP=y
# CONFIG_MMC_ASIC3 is not set

Almost there,
Matt Mullins
Received on Sun Dec 18 2005 - 18:05:19 EST