Re: Problem with JTAG and h5450

You could try using jflash_pxa_linux (from CVS). I think that's what I
used last time I needed to debrick an h5400. I have no idea what the
status is with the openwince bits.

If that fails, I guess you will need to watch the JTAG signals with an
oscilloscope to make sure that they are all connected properly and doing
the right thing.

p.

On Mon, 2005-04-25 at 19:25 +0000, Heitham Omar wrote:
> Hi
>
> I bricked my IPAQ 5450 and followed the instructions at
> http://evilg.home.t-link.de/jtag-howto/. When I get to the detect stage using
> the jtag program, I get the following message: "detect_parts: bad JTAG
> connection (TDO is 1)". That's with jtag 0.4, 0.5.1 doesn't give any message.
> I've checked and double checked the connections and they all look ok, there's
> also voltage on VCC and the 2 battery pins have been shorted (battery switch is
> held down as well). Anyone have any ideas on what else I could try.
Received on Tue Apr 26 2005 - 04:05:53 EDT