Re: problem with kernel build for h5400 familiar 0.8.1 kernel hh37.6

Op 11-mrt-05 om 21:08 heeft Erik Hovland het volgende geschreven:

> On Tue, Mar 08, 2005 at 12:28:03PM +0100, Siegfried Goericke wrote:
>> Hi,
>> I tried to build a new gpe-image.
>> When bitbake attempt to build the package
>> handhelds-pxa-2.4.19-rmk6-pxa1-hh37.6
>> the following error occured:
>> ===========================================
>> ccache arm-linux-gcc-3.3.3 -D__KERNEL__
>> -I/home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include
>> -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
>> -fno-common
>> -fomit-frame-pointer -Uarm -fno-common -pipe -frename-registers
>> -mapcs-32
>> -D__LINUX_ARM_ARCH__=5 -mcpu=xscale -mtune=xscale -msoft-float -Uarm
>> -nostdinc -DKBUILD_BASENAME=sched -fno-omit-frame-pointer -c -o
>> sched.o
>> sched.c
>> | In Datei, eingefügt
>> von
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/wait.h:13,
>> |
>> von
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/fs.h:12,
>> |
>> von
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/capability.h:17,
>> |
>> von
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/binfmts.h:5,
>> |
>> von
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/sched.h:9,
>> |
>> von
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/mm.h:4,
>> | von sched.c:23:
>> |
>> /home/blgoeris/src/build/tmp/work/handhelds-pxa-2.4.19-rmk6-pxa1-
>> hh37.6-r0/kernel/include/linux/kernel.h:10:20:
>> stdarg.h: Datei oder Verzeichnis nicht gefunden
stdargs.h: file or dir not found

hopes this helps,

Koen

>> ===========================================
>> I checked that the header file is at the rigth place and the include
>> path is
>> set correct.
>>
>> Any suggestions?
>
> Are you still having a problem? I am able to use bitbake to make a
> recent pxa kernel. I am not sure what the exact error is on your build,
> my german is pretty bad. Would it be hard to change your locale long
> enough to get a full english error message?
>
> E
>
> --
> Erik Hovland
> mail: erik AT hovland DOT org
> web: http://hovland.org/
> PGP/GPG public key available on request
> _______________________________________________
> H5400-port mailing list
> H5400-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
>
Received on Fri Mar 11 2005 - 15:27:08 EST