Re: booting 2.6 on a h5550

On Tue, 2005-03-08 at 11:35 +0000, Philip Blundell wrote:
> On Tue, 2005-03-08 at 11:13 +0100, Koen Kooi wrote:
> > Compiling & using mq as a modules doesn't help either, mq11xx-base is
> > completely silent now. I can modprobe it and it loads but does not print
> > messages to syslog or show up in /sys.
> > If you want to try it out yourself download the ipkgs from
> > http://dominion.kabel.utwente.nl/koen/pda/files/h5550/ipk/ (no, it's not
> > a feed) and install
> >
> > * the kernel-image
> > * all samcop modules
> > * all w1 modules
> > * the wire module
> > * the cfb* modules
> > * the mq* modules
> > * the soc-device module
>
> You also need the h5400_lcd module. This provides the initialisation
> data for the mediaq, as well as controlling power to the mediaq, panel
> and backlight.

root_at_h3900:~# modprobe h5400_lcd
Using /lib/modules/2.6.11-hh0/kernel/drivers/base/soc-device.ko
Using /lib/modules/2.6.11-hh0/kernel/arch/arm/common/ipaq/samcop_base.ko
Using /lib/modules/2.6.11-hh0/kernel/drivers/video/backlight/lcd.ko
Using /lib/modules/2.6.11-hh0/kernel/drivers/video/backlight/backlight.ko
Using /lib/modules/2.6.11-hh0/kernel/arch/arm/mach-pxa/h5400/h5400_lcd.ko
root_at_h3900:~# modprobe mq11xx_base
Using /lib/modules/2.6.11-hh0/kernel/drivers/base/soc-device.ko
insmod: cannot insert
`/lib/modules/2.6.11-hh0/kernel/drivers/base/soc-device.ko': File exists
(-1): File exists
Using /lib/modules/2.6.11-hh0/kernel/drivers/misc/soc/mq11xx_base.ko

and a dmesg gives:

samcop: using irq 104-149 on irq 33
IRQ33 (GPIO10): falling edges
REMOVEME: detected Philips LCD
MediaQ device initialization failed!

Would enabling LL_DEBUG give some more clues, or can I try anything else
to shed some more light on this issue?

regards,

Koen

> p.
>
>
> _______________________________________________
> H5400-port mailing list
> H5400-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
>
Received on Tue Mar 08 2005 - 07:00:02 EST