Re: booting 2.6 on a h5550

On Tue, 2005-03-08 at 11:13 +0100, Koen Kooi wrote:
> On Sun, 2005-03-06 at 21:43 +0100, Koen Kooi wrote:
> > Op 6-mrt-05 om 21:36 heeft Phil Blundell het volgende geschreven:
> >
> > > On Sun, 2005-03-06 at 21:16 +0100, Koen Kooi wrote:
> > >> 2.6.11-hh0 boots on a h5550! the mqfb doesn't seem to work, but it
> > >> makes a nice serial terminal :)
> > >
> > > Do you get any errors from the mqfb driver when you load it?
> >
> > Yes:
> >
> > MediaQ device initialization failed!
> >
> > I think Matthew Reimer had a fix for a similar problem on the h2200
> > with LAB, don't know if the fix is in cvs yet. It could be that the mq
> > doesn't like to be compiled in, will test that next week.
> Compiling & using mq as a modules doesn't help either, mq11xx-base is
> completely silent now. I can modprobe it and it loads but does not print
> messages to syslog or show up in /sys.
After a reboot it now prints the initialization failed message. Is
anybodye else seeing this too?

regards,

Koen

> If you want to try it out yourself download the ipkgs from
> http://dominion.kabel.utwente.nl/koen/pda/files/h5550/ipk/ (no, it's not
> a feed) and install
>
> * the kernel-image
> * all samcop modules
> * all w1 modules
> * the wire module
> * the cfb* modules
> * the mq* modules
> * the soc-device module
>
> I tested it with a OE build from yesterday, but 0.8.1 should work too.
> Backup important stuff before trying as your ipaq may burst in flames,
> explode, etc...
>
> regards,
>
> Koen
>
>
>
>
> >
> > regards,
> >
> > Koen
> >
> > _______________________________________________
> > H5400-port mailing list
> > H5400-port_at_handhelds.org
> > https://www.handhelds.org/mailman/listinfo/h5400-port
> >
>
> _______________________________________________
> H5400-port mailing list
> H5400-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
>
Received on Tue Mar 08 2005 - 06:07:58 EST