RE: new bootstrap image

Hey you are right... after i removed the battery and restarted my ipaq the
wifi works as expected. Great...

thanks.
rOger

> Have you tried removing the battery then doing a jog-reset.
> It seems to only way.
> 2 out of three times I get the no such device error
> and a jog reset is the only way to get it working again
>
> David
>
> -----Original Message-----
> From: h5400-port-bounces@handhelds.org
> [mailto:h5400-port-bounces@handhelds.org] On Behalf Of Philip Blundell
> Sent: 27 October 2003 10:27
> To: Roger Eisenecher
> Cc: h5400-port@handhelds.org
> Subject: Re: [H5400-port] new bootstrap image
>
>
> Mmm, that's interesting. Check dmesg; maybe there will be some clues
> there to what's going on with the wifi.
>
> p.
>
> On Mon, 2003-10-27 at 10:26, Roger Eisenecher wrote:
>> Hi List..
>>
>> Okey.. here on a h5450 touchsreen works like a charm (unstable2). But
> i
>> could not get the wifi to work. If i use the command "iwconfig wlan0
>> channel 11" i get the error message: Error for wireless request "Set
>> Frequency" (8804):
>> SET failed on device wlan0: No such device.
>>
>> I checked if all modules where loaded which are found on the project
>> page of the 5450 and they are loaded.
>>
>> The next thing is that i could not use the volume control: It reports
>> that it could not open the mixer device.
>>
>> There seems also to be a problem with suspend/resume and idle timeout
>> (Sleep Config - Auto sleep/Auto dim; they do not respect my inputs
> means
>> that the time goes out and the ipaq will be suspended even if I work
> on
>> it. I have to disable both features to work on the ipaq).
>>
>> But in general i must say: Great work; especially because the
>> touchscreen is now working...
>>
>> So that was my short feedback...
>>
>> Have phun.
>> rOger
>>
>> >> Here on a h5450, touchscreen works without any problem.
>> >> Doesn't seem wifi module was included for this kernel, need to
> check
>> >> out if I can get the module for the previous kernel to work.
>> >> Anyway, good work! Thanks! :)
>> >
>> > Glad to hear about the touchscreen. The wifi driver ought to be
>> included: which file seems to be missing? You might check that
> you're
>> > using the unstable2 image; the older unstable1 version did have the
>> wrong version of the at76c503 driver included.
>>
>>
>>
>
> _______________________________________________
> H5400-port mailing list
> H5400-port@handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
>
> _______________________________________________
> H5400-port mailing list
> H5400-port@handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port

Mit besten Grüssen
Roger Eisenecher/icER GmbH

+---------------------------------------------------------------------
| PGP Public Key -> http://www.icer.ch/contact/eisenecher_pub_key.txt
+---------------------------------------------------------------------
| Roger Eisenecher mailto:roger.eisenecher@icer.ch
| ic engineering & research GmbH Tel: +41 (0)52/223'13'70
| Grondweg 15 Fax: +41 (0)52/223'13'71
| CH-8266 Steckborn http://www.icer.ch/
Received on Mon Oct 27 12:29:12 2003