RE: new bootstrap image

Have you tried removing the battery then doing a jog-reset.
It seems to only way.
2 out of three times I get the no such device error
and a jog reset is the only way to get it working again

David

-----Original Message-----
From: h5400-port-bounces_at_handhelds.org
[mailto:h5400-port-bounces_at_handhelds.org] On Behalf Of Philip Blundell
Sent: 27 October 2003 10:27
To: Roger Eisenecher
Cc: h5400-port_at_handhelds.org
Subject: Re: [H5400-port] new bootstrap image

Mmm, that's interesting. Check dmesg; maybe there will be some clues
there to what's going on with the wifi.

p.

On Mon, 2003-10-27 at 10:26, Roger Eisenecher wrote:
> Hi List..
>
> Okey.. here on a h5450 touchsreen works like a charm (unstable2). But
i
> could not get the wifi to work. If i use the command "iwconfig wlan0
> channel 11" i get the error message: Error for wireless request "Set
> Frequency" (8804):
> SET failed on device wlan0: No such device.
>
> I checked if all modules where loaded which are found on the project
> page of the 5450 and they are loaded.
>
> The next thing is that i could not use the volume control: It reports
> that it could not open the mixer device.
>
> There seems also to be a problem with suspend/resume and idle timeout
> (Sleep Config - Auto sleep/Auto dim; they do not respect my inputs
means
> that the time goes out and the ipaq will be suspended even if I work
on
> it. I have to disable both features to work on the ipaq).
>
> But in general i must say: Great work; especially because the
> touchscreen is now working...
>
> So that was my short feedback...
>
> Have phun.
> rOger
>
> >> Here on a h5450, touchscreen works without any problem.
> >> Doesn't seem wifi module was included for this kernel, need to
check
> >> out if I can get the module for the previous kernel to work.
> >> Anyway, good work! Thanks! :)
> >
> > Glad to hear about the touchscreen. The wifi driver ought to be
> > included: which file seems to be missing? You might check that
you're
> > using the unstable2 image; the older unstable1 version did have the
> > wrong version of the at76c503 driver included.
>
>
>

_______________________________________________
H5400-port mailing list
H5400-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/h5400-port
Received on Mon Oct 27 2003 - 10:32:25 EST