AW: 5450 Status & Questions

I can ad that it makes sense to backup your wince from the terminal (get
zmodem) as well as in your wince. Linux is smaller than wince - and so
you won't have problems going back and chopping your backup made on
wince...

It takes you some additional 10min - but it's worth the time ;)

Greetings
nefs

-----Ursprüngliche Nachricht-----
Von: h5400-port-bounces_at_handhelds.org
[mailto:h5400-port-bounces_at_handhelds.org] Im Auftrag von Bob Davies
Gesendet: Dienstag, 14. Oktober 2003 12:57
An: Ian Chilton; h5400-port_at_handhelds.org
Betreff: Re: [H5400-port] 5450 Status & Questions

Ian..
I wouldn't worry about bricking. I've gone back and forth between
WM2003 and Familiar a
couple times now without any heartache at all.

As far as installing, the process I used is here:
http://familiar.handhelds.org/releases/v0.7/install/install-serial.html
It's very clear and easy to follow. The one thing that throws you off
is that the
current bootloaders don't support the video for the 5450, so you don't
see the pretty
splash screen. I thought it wasn't working for quite a while, but it
actually was. when
I connected via a serial console, and hit enter, vwhallah, there was the
boot prompt.
You can only install over a serial link, too. Although the cradle has
USB, you can't
create a terminal link over it to either install or get a console. (You
may already know
that, but if not, it'll save you the time it took me to figure that
out.)

There is a trick to restoring the 5450, though, because Bootblaster
backs up the ipaq
file store as well as the system store. There's a manual procedure for
separating them
which sounds kind of scary, but works just fine. You can find it here:
http://handhelds.org/hypermail/ipaq/178/17874.html

Hope you find this helpful at all. Even though the touch screen isn't
working, it's fun
to fire it up in console mode and play around.. It takes about an hour's
work to go back
and forth, once you've downloaded the latest unstable image (currently
9.3) and have
your saved WINCE image chopped down to size.
Have a good one,
Bob

On Oct 14, Ian Chilton <mailinglist_at_ichilton.co.uk> wrote:
>
> Hello,
>
> I have a lot of Linux experience but no experience of an Ipaq. I have
> just bought a 5450 and am expecting it to arrive at the end of the
> week and am ultimatly wanting to run Linux on it as I use Linux as my
> everyday operating system.
>
> So, I was wondering what the status of Linux on this device is and
would
> be interested in hearing from anyone running Linux on a 5450.
>
> I have had a look at: <a
href='http://www.handhelds.org/projects/h5400.html'>http://www.handhelds
.org/projects/h54
00.html</a> and
> it seems to be saying that touch screen isn't working and the wlan
> support is a bit scetchy - is this still the case or has these issues
> been fixed?
>
>
> And just a few general questions:
>
> What's the best up-to-date document to read which will tell me how to
> get Linux on to the device the 1st time?
>
> What's the likelyhood of me "bricking" the device?
>
> Can I safely restore PocketPC2003 after Linux has been on?
>
>
> Thanks!
>
>
> --ian
>
> _______________________________________________
> H5400-port mailing list
> H5400-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/h5400-port
>
_______________________________________________
H5400-port mailing list
H5400-port_at_handhelds.org
https://www.handhelds.org/mailman/listinfo/h5400-port
Received on Tue Oct 14 2003 - 11:08:23 EDT