Building a kernel

Hello, I'm building a new kernel for a iPAQ 5400, but it doesn't want to work.

I've debian sid (unstable) with a configuration to build cross plataform arm
software. I followed the steps described in http://people.debian.org/
~debacle/cross.html

I downloaded the last kernel from CVS of hanhelds.org (Linux Kernel
v2.4.19-rmk6-pxa1-hh23)

make menuconfig goes ok, and make zImage goes ok too, but after I boot with
the new kernel (uploaded with zmodem transfer into /boot directory with
minicom), the iPAQ freeze.

Any ideas? Someone have a .config that works with iPAQ 5400?

Thanks in advance,

I put the last message from minicom console:

loaded file of size = 0x000A8CCC at location 0xA0008000
kernel partition base A0008000
kernel_magic=E1A00000
kernel_region_words[9]=016F2818
Linux ELF flash_imgstart=50040000 size=01FC0000 dest=A0000000 offset=00008000
MMU Control=00000079
MMU PIDVAM=00000000
Skipping kernel copy by request.
A0008000: E1A00000
A0008004: E1A00000
A0008008: E1A00000
A000800C: E1A00000
A0008010: E1A00000
A0008014: E1A00000
A0008018: E1A00000
A000801C: E1A00000
A0008020: EA000002
A0008024: 016F2818
root_filesystem_name=ramdisk
Grabbed linuxargs, argc = 00000001
Using mach_type 000000DC
setting boot parameters to
 noinitrd root=/dev/mtdblock1 init=/linuxrc console=ttySA0
Making core tag at A0000100
Making cmdline tag at A0000114
Making mem32 tag at A00001B4
command line is: mtdparts=ipaq:0x00040000_at_0x00000000
(bootldr)ro,0x01FC0000_at_0x00
Disabling LCD controller
linuxEntryPoint=A0008000
Booting Linux image
CP15 r0=69052904
CP15 r1=00000079
CP15 r2=A39F4000
CP15 r3=FFFFFFFF
CP15 r5=00000007
CP15 r6=40015000
CP15 r7=FFFFFFFF
CP15 r8=FFFFFFFF
CP15 r9=FFFFFFFF
CP15 r10=FFFFFFFF
CP15 r13=00000000
CP15 r14=0FEBDE7E
CP15 r15=FFFFFFFF
Uncompressing Linux............................................ done, booting
t.

-- 
Pedro A. Gracia Fajardo
http://www.neuroomante.com