Nearly a Brick

Hi,
With great anticipation I have awaited a bootblaster for my 5450 and it
arrives.
MANY THANKS FOR THIS

I ran BootBlaster3900-2.6.exe and backed up my bootldr and
wince_image.gz and asset_image.gz.
I installed bootloader version 2.20.2.bin.gz all ok

I then installed bootgpe2-h5400.pb1-h3900.jffs2 successfully.

Now for some strange reason I want to go back to wince (navigation)

I did a load root and ymodem'd the wince_image.gz but its too big.
I then downloaded the softpaq SP24093.exe and took the kernel file and
did

dd bs=32 skip=1 if=KERNEL_PPC02_1_11_19.nbf of=ce.img

dd bs=1024 count=256 if=ce.img of=parrot.bin
dd bs=1024 skip=256 count=3840 if=ce.img of=flash_00040000.bin
dd bs=1024 skip=4096 count=4096 if=ce.img of=flash_00400000.bin

dd bs=1024 skip=8192 count=4096 if=ce.img of=flash_00800000.bin
dd bs=1024 skip=12288 count=4096 if=ce.img of=flash_00c00000.bin

Which works but the unit is just blank and vibrates when I hit the reset
button.

Im going to try the same thing with my wince_image.gz
Any ideas greatly received.

David
Received on Thu Jun 12 2003 - 07:56:21 EDT