Re: ipaq 4100 wireless

Hello Mike,

[Note: I cc: list, as was suggested]

Saturday, February 10, 2007, 5:44:22 PM, you wrote:

> Ok - got that all installed - getting timeouts on the wireless now...

> Couple of things - is the IRQ right ?

  I don't know, but why wouldn't it? I don't keep IRQs in mind, I take
them from headers, so if they're correct in headers, then... ;-)

> root_at_h4000:/proc# cat /proc/interrupts
> CPU0
> 1: 20 GPIO-l Power button
> 4: 9155 SC pxa2xx_udc
> 10: 10 SC LCD
> 11: 226263 SC pxa2xx-i2c
> 12: 0 SC irda0
> 13: 0 SC irda0
> 14: 6 SC BTUART
> 15: 9 SC FFUART
> 18: 18051 SC DMA
> 19: 26669320 SC PXA Timer Tick
> 31: 101479 GPIO asic3_mmc
> 34: 0 GPIO wlan0
> 36: 0 GPIO h4000_rs232
> 42: 686 GPIO Up button
> 43: 696 GPIO Left button
> 44: 138 GPIO Action button
> 45: 240 GPIO Down button
> 50: 4637 GPIO ads7846ts-ssp
> 101: 584 GPIO Right button
> 125: 62 ASIC3-GPIO Keyboard
> 158: 0 ASIC3-GPIO Record button
> 159: 0 ASIC3-GPIO Home button
> 160: 0 ASIC3-GPIO Mail button
> 161: 0 ASIC3-GPIO Contacts button
> 162: 0 ASIC3-GPIO Calendar button
> 163: 2 ASIC3-GPIO Earphone jack
> Err: 0

> As you can see - theres nothing doing on 34...

  That could mean something, or could no, all depending on the state
of wlan0.

> Also from my brief readings on the hx4700, the 4700acx needs to be loaded
> before the acx - but atm, the config is set to have the acx code in the
> kernel, and the 4000acx as a module - is this ok ?

  Apparently, not ;-)

  All in all, as I told, I know about acx wi-fi mostly as much as you
do. That's why it's still not working - I'd need to sit with it,
review config, review ML archives, add debug prittk's, etc. And as I
do the same on bunch of other things, it waits in queue. So, you're
welcome to join in and conquer it - I'm afraid, I can help only with
"maybe" and "probably" ;-)

  Oh, something I heard, PATCH_AROUND_BAD_SPOTS in
drivers/net/wireless/acx/mem.c must be undefined to get acx working on
some devices, e.g. rx3000. But that's how it is now in CVS anyway...

-- 
Best regards,
 Paul                            mailto:pmiscml_at_gmail.com