Hello Jod,
Wednesday, January 31, 2007, 5:54:40 AM, you wrote:
> Good evening all,
>
> The results are in, on immediate power up with minimal delay to
> get to the settings and power panel, the unit was sitting at 90%
> remaining capacity. After 20 seconds on, it dropped to 88%, at 2
> mins on, no other apps or utils running unit at 86%
Thanks for these results. So, my results with Linux are pretty
close, leaving room for my battery's age, and measurements errors.
(And I also was getting quick drop in WinCE during few initial
minutes).
>
>
> To recapp:
>
>
> Age: I've had this unit since May 04, after a hard reset last night
> 1938hrs PST with the backlight set to mid-point between high intensity and powersave.
>
>
>
> The results were:
>
>
> surface voltage on immediate start-up was indicating 90% remaining charge,
> after 20 seconds in idle 88%
> after 2 mins 86%
>
>
> Hope this helps.
>
> Jod
[]
-- Best regards, Paul mailto:pmiscml_at_gmail.comReceived on Sat Feb 03 2007 - 08:05:28 EST
This archive was generated by hypermail 2.2.0 : Sat Feb 03 2007 - 08:05:41 EST