Re: Nfs mount & lcd trouble

Well...

Finally I tested your "kit"...

I used the latest zImage rootfs and initrd from your site...

well... Now nfs mounting (perhaps thanks to /32 in exports?) works...

Then... lcd doesn't initialize yet...

I found that in initrd you have a wrong pxafb.ko (by diffing it with
mq1100fb.ko they are identical!)

while in latest rootfs you have the right module. I gunzipped initrd
copied pxafb.ko from rootfs into initrd than I gzip it again...

but on Ipaq I get:

Starting the framebuffer
Loading platform specific module:
/lib/modules/2.6.3-hh2/kernel/drivers/video/po
Starting the framebuffer console
Please convert me to use the PCD calculations
Division by zero in kernel.
[<bf004000>] (cfb_imageblit+0x0/0x4d4 [cfbimgblt]) from [<bf00c2ec>]
(putcs_una)
[<bf00c11c>] (putcs_unaligned+0x0/0x1f8 [fbcon]) from [<bf00c744>]
(accel_putcs)
[<bf00c6a8>] (accel_putcs+0x0/0xa0 [fbcon]) from [<bf00d5b4>]
(fbcon_putcs+0xa8)
 r8 = C0252A80 r7 = 00000000 r6 = BF0117B0 r5 = 00000000
 r4 = C3F77800
[<bf00d50c>] (fbcon_putcs+0x0/0xc0 [fbcon]) from [<c00c2968>]
(do_update_region)
 r7 = C02529E2 r6 = 00000001 r5 = 00000000 r4 = 00000000
[<c00c2884>] (do_update_region+0x0/0x1a4) from [<c00c3728>]
(redraw_screen+0x18)
[<c00c359c>] (redraw_screen+0x0/0x1f8) from [<c00c77b4>]
(take_over_console+0x1)
 r8 = 00000000 r7 = BF0103B8 r6 = C01A8014 r5 = 00000000
 r4 = 00000001
[<c00c7668>] (take_over_console+0x0/0x208) from [<bf014298>]
(init_module+0x68/)
[<bf014230>] (init_module+0x0/0x90 [fbcon]) from [<c0048bb0>]
(sys_init_module+)
 r4 = C0169D80
[<c0048a0c>] (sys_init_module+0x0/0x308) from [<c001c0e0>]
(ret_fast_syscall+0x)
 r7 = 00000080 r6 = 00000100 r5 = 00000000 r4 = 00000003
Division by zero in kernel.
[<bf004000>] (cfb_imageblit+0x0/0x4d4 [cfbimgblt]) from [<bf00c2ec>]
(putcs_una)
[<bf00c11c>] (putcs_unaligned+0x0/0x1f8 [fbcon]) from [<bf00c744>]
(accel_putcs)
[<bf00c6a8>] (accel_putcs+0x0/0xa0 [fbcon]) from [<bf00d5b4>]
(fbcon_putcs+0xa8)
 r8 = C0252A80 r7 = 00000000 r6 = BF0117B0 r5 = 00000000
 r4 = C3F77800
[<bf00d50c>] (fbcon_putcs+0x0/0xc0 [fbcon]) from [<c00c2968>]
(do_update_region)
 r7 = C02529E2 r6 = 00000001 r5 = 00000000 r4 = 00000000
[<c00c2884>] (do_update_region+0x0/0x1a4) from [<c00c3728>]
(redraw_screen+0x18)
[<c00c359c>] (redraw_screen+0x0/0x1f8) from [<c00c77b4>]
(take_over_console+0x1)
 r8 = 00000000 r7 = BF0103B8 r6 = C01A8014 r5 = 00000000
 r4 = 00000001
[<c00c7668>] (take_over_console+0x0/0x208) from [<bf014298>]
(init_module+0x68/)
[<bf014230>] (init_module+0x0/0x90 [fbcon]) from [<c0048bb0>]
(sys_init_module+)
 r4 = C0169D80
[<c0048a0c>] (sys_init_module+0x0/0x308) from [<c001c0e0>]
(ret_fast_syscall+0x)
 r7 = 00000080 r6 = 00000100 r5 = 00000000 r4 = 00000003
Console: switching to colour frame buffer device 80x30
h4000_lcd_set_power:
h4000_lcd_set_enable:
h4000_backlight_set_power: on=1

There should be something to adjust :°°°...

Ciao,

Eddi
Received on Sun Mar 28 2004 - 00:01:07 EST