Re: Cannot load haret

Hi Gerhard
Nothing happens WinCE thinking...it looks like no reaction and I kill File
Explorer & press Reset button
using the stylus in the small hole in the back ipaq's panel.
Thanks for your help.

On Thu, May 8, 2008 at 1:01 AM, Gerhard Zintel <Gerhard.Zintel_at_mrs-thomas.de>
wrote:

> Hi,
>
> looks all correct, my ipaq 2210 is running with the below described setup.
> Where does it stop, what happens after launching haret.exe?
>
> Gerhard
>
> On Mittwoch, 7. Mai 2008, roof99 wrote:
> > Hi,all
> > I am trying to boot familiar with last haret version on my ipaq 2210 but
> > still without success.
> > I followed this procedure to load linux from SD card:
> >
> http://handhelds.org/moin/moin.cgi/CardBoot#head-1f93f400f79f54a192be22a95e
> >492347b299e4e7
> >
> > At this moment I have:
> > SD 2GB with 2 partitions :
> >
> > 1) /mnt/sde1 - FAT 100MB with :
> > haret-0.5.1.exe
> > earlyharetlog.txt (empty file)
> > startup.txt (see next 4 lines)
> > -----------------------------------------------------------
> > set KERNEL zImage
> > set MTYPE 341
> > set CMDLINE "root=/dev/mmcblk0p2 rootdelay=5 console=ttyS0,115200n8
> > console=tty0"
> > bootlinux
> >
> > -----------------------------------------------------------
> > haretlog.txt (attached)
> > zImage (from zImage-2.6.15-hh2200) and it's ~1.3MB
> >
> > 2) /mnt/sde2 - ext2 with familiar system
> >
> > Thanks in advance
>
>
> _______________________________________________
> H2200-port mailing list
> H2200-port_at_handhelds.org
> https://handhelds.org/mailman/listinfo/h2200-port
>
Received on Thu May 08 2008 - 13:53:02 EDT