PCMCIA/CF question again

Hi

Im apparently the only one who can't mount a CF disk on the IPaq so please
help me.

On a laptop I have used fdisk and created a primary FAT16 partition and run
the mkfs.vfat command.
I can without any problems mount and use the card on the laptop (see dmesg
output below), but it won't work on the IPaq (see dmesg and cardctl info
below)

I have used Michael's starterkit from April 4 and only made a few changes so
that I can use my WLAN card (which does work).

Best Regards
Benny

PS: Anyone who is looking at the MMC/SD interface?

--------------From Laptop--------------------
hdg: Flash Card, CFA DISK drive
ide3 at 0x110-0x117,0x11e on irq 10
hdg: max request size: 128KiB
hdg: 256000 sectors (131 MB) w/0KiB Cache, CHS=500/16/32
 hdg: hdg1
ide-cs: hdg: Vcc = 3.3, Vpp = 0.0
updfstab: numerical sysctl 1 23 is obsolete.

--------------From Ipaq--------------------
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Setting type of unclaimed IRQ30 from pxa2xx_core_pcmcia_config_skt+0x74/0x9c
[pxa2xx_core]
IRQ30 (GPIO7): falling edges
Trying to free nonexistent resource <c4896000-c489600f>
hda: Flash Card, CFA DISK drive
Using anticipatory io scheduler
ide0 at 0xc4896000-0xc4896007,0xc489600e on irq 30
Module ide_cs cannot be unloaded due to unsafe usage in
include/linux/module.h:489
ide-cs: hda: Vcc = 5.0, Vpp = 0.0

~ # cardctl status
Socket 0:
  3.3V 16-bit PC Card
  function 0: [ready], [bat dead], [bat low]

~ # cardctl info
PRODID_1="128MB"
PRODID_2=" "
PRODID_3=""
PRODID_4=""
MANFID=0000,0000
FUNCID=4
Received on Tue Apr 06 2004 - 15:32:08 EDT