Re: Re: Re: stuck on black screen

Hi Dan,

The errors you describe are most likely due to:
- using the wrong kernel
- improper setup.

Examining RRSyslog might help to identify the problem, but the ultimate
method is using a serial port to debug.

If you follow the instructions on the RR wiki page _AND_ use the images
mentioned there you should not have any problems.

Marcus.

On Sat, 2007-11-03 at 20:45 +0000, Dan Leech wrote:
> cheers marcus :)
>
> ramdisk rescue boots without any problems.
>
> the opie dist. still black screens when using both the packaged zImage
> and the zImage from /boot/
>
> the opie dist. gets farther using the ramdisk rescue zImage, but then
> fails with something along the lines of "unable to mount root
> filesystem on hda2"
>
> thanks for the help, cant wait to get rid of windows ....
>
>
> On 02/11/2007, Marcus Brown <marcusbrutus_at_internode.on.net> wrote:
> Dan,
>
> Please have a look at RamdiskRescue.
>
> Marcus.
>
> On Wed, 2007-10-31 at 23:50 +0000, Dan Leech wrote:
> > hi
> >
> > i believe im getting this same problem, any news on this?
> >
> > i run haret, it shows a dialog (botting linux), breiefly
> cuts to
> > console with some messages and then blanks and stays that
> way. (so I
> > guess somethings going wrong with the kernel?)
> >
> > im using a CF card which is partitioned as follows:
> >
> > Number Start End Size Type File system Flags
> > 1 31.7kB 250MB 250MB primary fat16
> > 2 250MB 512MB 263MB primary ext2
> >
> > the fat16 partition contains haret.exe, startup.txt and
> zImage as
> > specified ( http://www.handhelds.org/moin/moin.cgi/CardBoot)
> and im
> > using the oopie package.
> >
> > this is the log file using earlyharetlog.txt hack...
> >
> >
> > ===== HaRET 0.5.0 =====
> > Setting KMode to true.
> > Old KMode was 1
> > Finished initializing output
> > Loading dynamically bound functions
> > Function '?GXOpenDisplay@@YAHPAUHWND__@@ K_at_Z' in library
> 'gx' at
> > 0387122C
> > Function '?GXCloseDisplay@@YAHXZ' in library 'gx' at
> 038715EC
> > Function '?GXBeginDraw@@YAPAXXZ' in library 'gx' at 03871674
> > Function '?GXEndDraw@@YAHXZ' in library 'gx' at 0387176C
> > Function 'LoadLibraryExW' in library 'coredll' at 01F7206C
> > Function 'GetSystemPowerStatusEx2' in library 'coredll' at
> 01F77904
> > Function 'SleepTillTick' in library 'coredll' at 01F71F00
> > Function 'AllocPhysMem' in library 'coredll' at 01F71E08
> > Function 'FreePhysMem' in library 'coredll' at 01F71E90
> > Function 'CreateToolhelp32Snapshot' in library 'toolhelp' at
> 0261108C
> > Function 'Process32First' in library 'toolhelp' at 0261114C
> > Function 'Process32Next' in library 'toolhelp' at 026111B4
> > Function 'Module32First' in library 'toolhelp' at 0261133C
> > Function 'Module32Next' in library 'toolhelp' at 026113B0
> > Function 'CloseToolhelp32Snapshot' in library 'toolhelp' at
> 02611090
> > Unable to load library 'ace_ddi'
> > Unable to load library 'ace_ddi'
> > Detecting memory
> > WinCE reports memory size 67108864 (phys=29933568
> store=29859840)
> > Detecting current machine
> > Trying to detect machine (Plat='PocketPC' OEM='hp iPAQ
> h2200')
> > Wince reports processor: core=Intel(R) name=PXA255 cat=
> vend=INTEL
> > Looking at machine HTC Universal
> > Looking at machine Alpine
> > Looking at machine Apache
> > Looking at machine AximX50
> > Looking at machine AximX5
> > Looking at machine Beetles
> > Looking at machine Blueangel
> > Looking at machine Himalaya
> > Looking at machine Magician
> > Looking at machine H1910
> > Looking at machine H1940
> > Looking at machine H2200
> > Registering command IGPIO
> > Registering command WG|PIO
> > Registering command GPLR
> > Registering command GPDR
> > Registering command GAFR
> > Registering command GPIO
> > Registering command GPIOST
> > Registering command LOADLIBRARYEX
> > Registering command TRACES
> > Registering command RESUMETRACES
> > Registering command WI|RQ
> > Registering command TRACE
> > Registering command TRACEMASK
> > Registering command TRACE2
> > Registering command TRACETYPE
> > Registering command TRACE2TYPE
> > Registering command INSN
> > Registering command INSNREENABLE
> > Registering command INSNREG1
> > Registering command INSNREG2
> > Registering command INSN2
> > Registering command INSN2REENABLE
> > Registering command INSN2REG1
> > Registering command INSN2REG2
> > Registering command ALTL1TRACE
> > Registering command MAXL1TRACE
> > Registering command MAXL1TRACERESUME
> > Registering command MMUTRACE
> > Registering command TRACEIGNORE
> > Registering command TRACEFORWATCH
> > Registering command PERMISSIVEMMUTRACE
> > Registering command KILL
> > Registering command PS
> > Registering command LSMOD
> > Registering command ADDR2MOD
> > Registering command AC97
> > Not registering command ATIDBG
> > Initializing for machine 'H2200'
> > HaRET(1)# set ramaddr 0xa0000000
> > HaRET(2)# addlist IRQS p2v(0x40D00000) 0x7f 32 0
> > HaRET(3)# addlist IRQS p2v(0x40E00048) 0 32 0
> > HaRET(4)# addlist IRQS p2v(0x40E0004c) 0 32 0
> > HaRET(5)# addlist IRQS p2v(0x40E00050) 0 32 0
> > HaRET(6)# addlist GPIOS p2v(0x40E00000)
> > HaRET(7)# addlist GPIOS p2v(0x40E00004)
> > HaRET(8)# addlist GPIOS p2v(0x40E00008)
> > HaRET(9)# addlist GPIOS p2v(0x40E0000C)
> > HaRET(10)# addlist GPIOS p2v(0x40E00010)
> > HaRET(11)# addlist GPIOS p2v(0x40E00014)
> > HaRET(12)# addlist GPIOS p2v(0x40E00054)
> > HaRET(13)# addlist GPIOS p2v(0x40E00058)
> > HaRET(14)# addlist GPIOS p2v(0x40E0005c)
> > HaRET(15)# addlist GPIOS p2v(0x40E00060)
> > HaRET(16)# addlist GPIOS p2v(0x40E00064)
> > HaRET(17)# addlist GPIOS p2v(0x40E00068)
> > Welcome, this is HaRET 0.5.0 running on WindowsCE v4.20
> > Minimal virtual address: 00010000, maximal virtual address:
> 7FFFFFFF
> > Detected machine H2200/PXA (Plat='PocketPC' OEM='hp iPAQ
> h2200')
> > CPU is Intel XScale ARM arch 5TE revision 3 product 16
> stepping 6
> > running in system mode
> > Enter 'HELP' for a short command summary.
> >
> > Running WSAStartup
> > Starting gui
> > In initdialog
> > Found machine H2200
> > executing startup.txt
> > HaRET(1)# set KERNEL zImage
> > HaRET(2)# set MTYPE 341
> > HaRET(3)# set CMDLINE "root=/dev/hda2 rootdelay=5
> > console=ttyS0,115200n8 console=tty0"
> > HaRET(4)# bootlinux
> > boot KERNEL=zImage INITRD=
> > Opening file zImage
> > boot params: RAMADDR=a0000000 RAMSIZE=04000000 MTYPE=341
> > CMDLINE='root=/dev/hda2 rootdelay=5 console=ttyS0,115200n8
> > console=tty0'
> > Boot FB feedback: 1
> > Built virtual to physical page mapping
> > Allocated 345 pages (tags=47C00000/a383f000
> kernel=47C01000/a3844000
> > initrd=47D55000/a35ad000 index=47D55000/a35ad000)
> > Built kernel tags area
> > Built page index
> > Video buffer at 8FC42000 sx=240 sy=320 mx=60 my=53
> > Video Phys FB=04042000 Fonts=a35ab064
> > preload=2168_at_47D58000/a35aa000 sj=47D58000
> stack=47D56000/a35ac000
> > data=47D57000/a35ab000 exec=a35aa128
> > Reading 1390316 bytes...
> > Read complete
> > Launching to physical address a35aa010
> > Trampoline setup (tram=136_at_0002B46C/2002b46c/a035846c)
> > MMU setup: mmu=B00B0000/a02b0000
> > Go Go Go...
> >
> >
> > cheers :)
> >
> > --
> > Dan Leech
> >
> > Dynamic Web Sites
> > www.dantleech.com
> >
> > Bath Gigs
> > www.bathgigs.co.uk
> > _______________________________________________
> > H2200-port mailing list
> > H2200-port_at_handhelds.org
> > https://handhelds.org/mailman/listinfo/h2200-port
>
>
>
>
> _______________________________________________
> H2200-port mailing list
> H2200-port_at_handhelds.org
> https://handhelds.org/mailman/listinfo/h2200-port
Received on Sat Nov 03 2007 - 18:41:58 EST